BTS70402EPGXUMA1 vs BTS3028SDRATMA1 比較
詳細並排比較 BTS70402EPGXUMA1 由 Infineon 與 BTS3028SDRATMA1 由 Infineon. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | BTS70402EPGXUMA1 | BTS3028SDRATMA1 |
|---|---|---|
| 品牌 | Infineon | Infineon |
| 類別 | Power MOSFET Drivers | Power MOSFET Drivers |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Manufacturer | Infineon Technologies | — |
| Part Family | PROFET+2 (BTS70xxx series) | — |
| 功能 | Smart High-Side Power Switch | — |
| Number of Channels | 4 | — |
| 輸出配置 | High-side, N-channel MOSFET | — |
| Continuous Load Current per Channel | 3.5 A (typical) | — |
| On-State Resistance (Ron) per Channel | 65 mOhm typical | — |
| Operating Voltage Range | 6 V to 18 V nominal (load-dump tolerant to 40 V) | — |
| Logic Supply Voltage | 3.3 V / 5 V compatible MCU I/O | — |
| Protection Features | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection | Overtemperature shutdown, overvoltage clamp, ESD, short-circuit current limit, reverse battery, ground loss |
| Diagnostic Interface | SPI status register, current-sense feedback | — |
| 工作溫度範圍 | -40 °C to +150 °C junction | — |
| 封裝 | PG-TSDSO-14 (exposed thermal pad) | PG-TO252-3-11 (DPAK, 3 pins = 2 leads + tab) |
| 安裝類型 | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Qualified (automotive grade) | — |
| RoHS Compliance | Compliant | — |
| Product Type | — | Smart Low-Side Power Switch |
| 拓撲 | — | 1:1 N-Channel, single channel |
| 輸出電流 (最大) | — | 5 A |
| On-Resistance RDS(ON) | — | 28 mΩ (typ.) |
| Load Voltage (max) | — | 60 V (load-dump rated) |
| 工作電源電壓 | — | 5 V to 28 V (typ. 13.5 V) |
| Logic Input Voltage (IN) | — | Logic-level, 3.3 V/5 V compatible |
| 工作溫度 | — | -40 °C to +150 °C (junction) |
| Status Output | — | Open-drain diagnostic flag |
| Automotive Qualification | — | AEC-Q100 |
| RoHS 狀態 | — | Compliant |
| MSL 等級 | — | [DATA_NEEDED: MSL rating] |