BTS72002EPAXUMA1 vs BTS70121EPAXUMA1 比較
詳細並排比較 BTS72002EPAXUMA1 由 Infineon 與 BTS70121EPAXUMA1 由 Infineon. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | BTS72002EPAXUMA1 | BTS70121EPAXUMA1 |
|---|---|---|
| 品牌 | Infineon | Infineon |
| 類別 | Power MOSFET Drivers | Power MOSFET Drivers |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | Smart High-Side Power Switch (PROFET+2) | Smart High-Side Power Switch |
| 拓撲 | 2 x High-Side N-Channel (2:1 outputs) | — |
| Number of Channels | 2 | 1 |
| On-State Resistance (RDS(on)) | 66.5 mOhm per channel (typical) | 2 x 8 mOhm (typical) |
| Continuous Load Current | 1.2 A per channel | — |
| 電流限制 | 0.8 V to 1.2 A (adjustable) | — |
| Operating Voltage (VS) | 6 V to 18 V nominal, up to 28 V extended | — |
| Reverse Battery Capability | Yes, down to -28 V | — |
| Standby Current | [DATA_NEEDED: standby current in uA] | — |
| Protection Features | Over-current, short-circuit, over-temperature, over-voltage, reverse polarity | — |
| Diagnostic Output | Current sense IS pin (analog) | — |
| 工作溫度 | -40 C to +150 C junction | — |
| 封裝 | PG-TSDSO-14 (14-pin TSSOP with exposed pad) | PG-TSDSO-14-22 (14-pin, exposed pad) |
| 安裝類型 | Surface Mount | Surface Mount |
| Automotive Qualification | AEC-Q100 | AEC-Q100 |
| MSL 等級 | 2A (4 weeks) | MSL2 or MSL3 (per JEDEC J-STD-020) |
| RoHS 狀態 | Compliant | — |
| Manufacturer | — | Infineon Technologies |
| Product Family | — | PROFET+2 (Protected FET) |
| 輸出配置 | — | High-Side |
| Switch Type | — | N-Channel (2x8 mOhm integrated) |
| 最大輸出電流 | — | 8.5 A |
| Pin Pitch | — | 0.65 mm |
| 工作溫度範圍 | — | -40C to +150C (junction, AEC-Q100) |
| Supply Voltage (Vbb) | — | [DATA_NEEDED: Vbb operating range] |
| Load Dump Protection | — | Yes (integrated) |
| Reverse Battery Protection | — | Yes (compatible with harshest requirements per family datasheet) |
| Diagnostics | — | Current sense / status output |
| Protections | — | Overload, short-circuit, over-temperature, over-voltage |
| Packaging | — | Tape & Reel |
| RoHS Compliance | — | Compliant |