BTS72002EPAXUMA1 vs BTS70202EPAXUMA1 比較
詳細並排比較 BTS72002EPAXUMA1 由 Infineon 與 BTS70202EPAXUMA1 由 Infineon. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | BTS72002EPAXUMA1 | BTS70202EPAXUMA1 |
|---|---|---|
| 品牌 | Infineon | Infineon |
| 類別 | Power MOSFET Drivers | Power MOSFET Drivers |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | Smart High-Side Power Switch (PROFET+2) | Smart High-Side Power Switch (dual channel) |
| 拓撲 | 2 x High-Side N-Channel (2:1 outputs) | — |
| Number of Channels | 2 | 2 |
| On-State Resistance (RDS(on)) | 66.5 mOhm per channel (typical) | — |
| Continuous Load Current | 1.2 A per channel | — |
| 電流限制 | 0.8 V to 1.2 A (adjustable) | — |
| Operating Voltage (VS) | 6 V to 18 V nominal, up to 28 V extended | — |
| Reverse Battery Capability | Yes, down to -28 V | — |
| Standby Current | [DATA_NEEDED: standby current in uA] | — |
| Protection Features | Over-current, short-circuit, over-temperature, over-voltage, reverse polarity | Over-current, short-circuit, over-temperature, over-voltage, reverse battery, loss of ground |
| Diagnostic Output | Current sense IS pin (analog) | Analog current sense (IS pin) per channel |
| 工作溫度 | -40 C to +150 C junction | — |
| 封裝 | PG-TSDSO-14 (14-pin TSSOP with exposed pad) | PG-TSDSO-14-22 (exposed pad) |
| 安裝類型 | Surface Mount | Surface Mount |
| Automotive Qualification | AEC-Q100 | — |
| MSL 等級 | 2A (4 weeks) | — |
| RoHS 狀態 | Compliant | Compliant |
| Technology | — | SMART7 (PROFET family) |
| 輸出配置 | — | High-side, 1:1 N-Channel MOSFET per channel |
| Continuous Load Current (per channel) | — | 2.5 A |
| Total Device Load Current | — | 5 A |
| On-State Resistance (typ, per channel) | — | 30 mΩ |
| Operating Voltage Range (Vbb) | — | 6 V to 18 V (load dump tolerant) |
| Current Limit (typ) | — | 12 A (selectable) |
| Input Logic Compatibility | — | 3.3 V and 5 V CMOS |
| 工作溫度範圍 | — | -40 C to +150 C (junction) |
| Packing | — | Tape & Reel (XUMA1 suffix) |