CD4541BF vs CD4541BE 比較
詳細並排比較 CD4541BF 由 Texas Instruments 與 CD4541BE 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | CD4541BF | CD4541BE |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 類別 | Clock & Timing | Clock & Timing |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | CMOS programmable timer | CMOS programmable timer |
| High Voltage Rating | 20 V | — |
| Supply Voltage Range | 3 V to 18 V | — |
| Counter Stages | 16 stages | 16 stages |
| Maximum Count | 65,536 | — |
| Oscillator Frequency Range | 100 kHz to 6 MHz | — |
| 供應電流 | 100 µA | — |
| 工作溫度 | -55°C to +125°C | [DATA_NEEDED: operating temperature range] |
| 封裝 | 14-CDIP | 14-pin PDIP |
| 安裝類型 | Through-hole | Through-hole |
| Output Control | MODE input on pin 10 | — |
| MODE-high Output | Continuous square wave at oscillator frequency divided by 2N | — |
| MODE-low Output | Selected timed output after MASTER RESET | — |
| Automatic Reset | Automatic power-on reset | — |
| Timer Components | 2 external resistors and 1 external capacitor | — |
| Manufacturer | Texas Instruments | — |
| 生命週期狀態 | Active | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Maximum Oscillator Frequency | — | 100 kHz |
| Supply Voltage Rating | — | 20 V high-voltage rating |
| Oscillator Timing Components | — | 2 resistors and 1 capacitor |
| Power-On Reset | — | Automatic power-on reset |
| MODE Input | — | Pin 10; logic 1 for continuous square-wave mode and logic 0 for reset-dependent output mode |
| Output Frequency | — | Oscillator frequency divided by 2N |
| Logic Family | — | CMOS |
| Master Reset | — | Supported |
| Output Control Logic | — | Programmable output selection |
| Supply Voltage Minimum | — | [DATA_NEEDED: minimum supply voltage] |
| Supply Voltage Maximum | — | 20 V rating |
| 靜態電流 | — | [DATA_NEEDED: quiescent current] |
| Output Current | — | [DATA_NEEDED: output current] |
| Input Leakage Current | — | [DATA_NEEDED: input leakage current] |