CP2102N-A01-GQFN28R vs CP2102N-A02-GQFN28 比較
詳細並排比較 CP2102N-A01-GQFN28R 由 Silicon Labs 與 CP2102N-A02-GQFN28 由 Silicon Labs. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
Silicon Labs
CP2102N-A01-GQFN28R - USB to UART Bridge QFN-28 | Silicon Labs
CP2102N-A01-GQFN28R ✓ 啟用中
規格比較
| 參數 | CP2102N-A01-GQFN28R | CP2102N-A02-GQFN28 |
|---|---|---|
| 品牌 | Silicon Labs | Silicon Labs |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| 庫存狀態 | — | In Stock |
| 單價 (USD) | — | $2.35 |
| Product Type | USB to UART Bridge Controller | — |
| Series | USBXpress | — |
| USB Standard | USB 2.0 Full-Speed (12 Mbps) | — |
| UART Interface | USB 2.0 UART | — |
| Number of UART Channels | 1 | — |
| 資料速率 | 300 baud to 1 Mbaud | — |
| Supply Voltage (VBUS) | 4.0 V to 5.25 V | — |
| Supply Voltage (VDD) | 3.0 V to 3.6 V | 3 V to 3.6 V |
| Internal Regulator Output | 3.3 V (up to ~100 mA) | 3.3 V |
| 工作溫度 | -40 C to +85 C | -40C to +85C |
| 封裝 | 28-QFN (5x5 mm) with exposed pad | QFN-28 (5x5 mm) |
| 安裝類型 | Surface Mount | Surface Mount |
| GPIO | Yes (multiple, signal-configurable) | — |
| Reset Pin | RSTb (active-low hardware reset) | — |
| On-chip Oscillator | Yes (no external crystal required) | — |
| MSL 等級 | MSL3 (per JEDEC J-STD-020) | — |
| RoHS 狀態 | Compliant | Compliant |
| Host Driver | Silicon Labs CP210x VCP driver | — |
| 功能 | — | USB 2.0 to UART Bridge Controller |
| Protocol | — | USB 2.0 Full-Speed |
| I/O Voltage (VIO) | — | 1.8 V to VDD |
| Maximum Baud Rate | — | 3 Mbaud |
| USB Speed | — | Full-Speed (12 Mbps) |
| Digital I/O Pins | — | 7 |
| Internal Regulator Current | — | Up to 100 mA (external load) |
| Internal Oscillator | — | 48 MHz (no external crystal required) |
| ROM for Descriptors | — | 960 bytes (one-time programmable) |
| UART Data Bits | — | 5, 6, 7, or 8 (programmable) |
| Hardware Flow Control | — | RTS/CTS supported |