DS90C401M vs DS90C402M 比較
詳細並排比較 DS90C401M 由 Texas Instruments 與 DS90C402M 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | DS90C401M | DS90C402M |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | Unknown | 啟用中 |
| Product Type | Dual low voltage differential signaling (LVDS) driver | — |
| Number of Driver Outputs | 2 differential outputs | — |
| Architecture | Current-mode driver | — |
| Typical Differential Output Swing | 340 mV | — |
| 工作電源電壓 | [DATA_NEEDED: operating supply voltage] | [DATA_NEEDED: operating supply voltage] |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | [DATA_NEEDED: maximum data rate] |
| Propagation Delay | [DATA_NEEDED: propagation delay] | [DATA_NEEDED: propagation delay] |
| Output Current | [DATA_NEEDED: output current] | — |
| Short-Circuit Fault Current | Minimized | — |
| Power Dissipation Behavior | Remains low at high frequency | — |
| 封裝 | 8-lead small-outline package | 8-lead SOIC |
| 腳位數 | 8 pins | — |
| 安裝類型 | Surface mount | Surface mount |
| Compatible Receiver | DS90C402 | — |
| Link Architecture | Point-to-point | — |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS 狀態 | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| Automotive Qualification | unknown | — |
| Device Type | — | Dual LVDS receiver |
| Receiver Configuration | — | 2 receivers |
| Input Threshold Sensitivity | — | ±100 mV |
| Common-Mode Noise Protection | — | Supported |
| Data-Rate Optimization | — | High data rate |
| Power Optimization | — | Low power |
| Interface Pairing | — | DS90C401 companion device |
| 拓撲 | — | Dual high-speed point-to-point interface |
| Package Family | — | SOIC surface-mount package family |
| 腳位數 | — | 8 |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| 供應電流 | — | [DATA_NEEDED: supply current] |
| Differential Input Termination | — | [DATA_NEEDED: input termination requirement] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| MSL | — | [DATA_NEEDED: moisture sensitivity level] |