EPC1441PCB vs EPC1441PI8 比較
詳細並排比較 EPC1441PCB 由 Altera 與 EPC1441PI8 由 Intel. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | EPC1441PCB | EPC1441PI8 |
|---|---|---|
| 品牌 | Altera | Intel |
| 類別 | FPGA & CPLD | Memory ICs |
| 生命週期狀態 | Obsolete | Obsolete |
| Device Type | Enhanced Configuration Device for SRAM FPGAs | — |
| Memory Density | 4,435,200 bits (~4 Mb) | — |
| Supported FPGA Families | ACEX 1K, APEX 20K, APEX II, FLEX 10K, FLEX 6000, FLEX 8000, Mercury | APEX II, APEX 20K/20KC/20KE, Mercury, ACEX 1K, FLEX 6000/10KE/10KA |
| Programmability | In-system programmable via JTAG (IEEE 1149.1) | One-Time Programmable (OTP) |
| Configuration Interface | Altera serial/parallel configuration bus (nSTATUS, nCONFIG, DCLK, DATA) | Serial, 4-pin (nSTATUS, nCONFIG, DCLK, DATA0) |
| Supply Voltage (VCC) | 3.3 V nominal | — |
| I/O Voltage Tolerance | 5 V tolerant | — |
| 封裝 | PLCC-20 (Plastic Leaded Chip Carrier) | 8-PDIP (8-pin Plastic DIP) |
| 安裝類型 | Surface Mount / Socket | Through-Hole |
| 工作溫度 | 0 C to +70 C (commercial) | 0C to +70C (commercial) |
| Configuration Mode | Automatic at power-up | — |
| Architecture | Flash memory + on-chip configuration controller | — |
| JTAG Support | Yes (IEEE 1149.1 boundary scan) | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS compliance status] | — |
| Lead-Free | [DATA_NEEDED: lead-free status] | — |
| 記憶體類型 | — | OTP Configuration PROM |
| 記憶體容量 | — | 440 kb (440,800 bits) |
| 供應電壓 | — | 5.0 V |
| Cascading Support | — | Yes (nCASC output for multi-device chains) |
| Programming Voltage | — | Not required (single 5.0 V supply) |
| Lead-Free / RoHS | — | Not RoHS compliant (PDIP, SnPb finish) |
| MSL 等級 | — | 1 (unlimited) |
| Supported Configuration Modes | — | Passive serial (PS) only |
| Manufacturer | — | Intel (formerly Altera) |