EPC1441TI32 vs EPC1TI32 比較
詳細並排比較 EPC1441TI32 由 Altera 與 EPC1TI32 由 Altera. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | EPC1441TI32 | EPC1TI32 |
|---|---|---|
| 品牌 | Altera | Altera |
| 類別 | Memory ICs | Memory ICs |
| 生命週期狀態 | Obsolete | Obsolete |
| 記憶體類型 | OTP Configuration PROM | FPGA Configuration PROM (Serial, OTP) |
| 記憶體容量 | 440,800 x 1 bit (approximately 440 kb) | — |
| Memory Organization | Serial, 1-bit data bus | — |
| 供應電壓 | 5.0 V | 3.3 V (derived from VCCIO of target FPGA) |
| Access Time | 90 ns (approximately 10 MHz) | — |
| Configuration Interface | Altera Active Serial (AS) | — |
| 工作溫度 | -40C to +85C (Industrial) | -40 C to +85 C (industrial) |
| 封裝 | 32-pin TQFP (7 x 7 mm) | 32-pin TQFP (7 x 7 mm) |
| 安裝類型 | Surface Mount | Surface Mount |
| Technology | CMOS OTP flash cell | — |
| Programmability | One-Time Programmable (OTP) | — |
| Supported FPGA Families | ACEX 1K, APEX 20K, APEX II, Arria GX, Cyclone, Cyclone II, FLEX 10K, FLEX 6000, Mercury, Stratix, Stratix GX, Stratix II, Stratix II GX | — |
| Cascade Support | Yes (nCASC pin for multi-PROM chains) | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: rohs status from datasheet] |
| MSL 等級 | [DATA_NEEDED: MSL level] | [DATA_NEEDED: MSL level] |
| Memory Density | — | 1 Mbit (1,046,496 bits) |
| 介面 | — | Altera 4-pin serial (DCLK, DATA, nCONFIG, nSTATUS) |
| Programming Interface | — | JTAG (IEEE 1149.1) |
| Compatible FPGAs | — | ACEX 1K, FLEX 10K, FLEX 6000, MAX 9000 |
| Replacement For | — | EPC1064, EPC1441 |
| Configuration Software | — | Quartus II, MAX+PLUS II |
| Programming Hardware | — | MasterBlaster / ByteBlasterMV / USB-Blaster |
| Lead-Free | — | [DATA_NEEDED: lead-free status] |