ICS511MIT vs ICS511MI 比較
詳細並排比較 ICS511MIT 由 Renesas Electronics 與 ICS511MI 由 Renesas Electronics. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
規格比較
| 參數 | ICS511MIT | ICS511MI |
|---|---|---|
| 品牌 | Renesas Electronics | Renesas Electronics |
| 類別 | Clock & Timing | Clock & Timing |
| 生命週期狀態 | Obsolete | Obsolete |
| Product Type | PLL clock multiplier / clock generator IC | Single PLL clock generator IC |
| Manufacturer | Renesas Electronics | — |
| Series | ICS511 | ICS511 LOCO |
| 最大時脈頻率 | 160 MHz | — |
| Multiplier Output | 1 | — |
| Reference Input | Clock or crystal | — |
| PLL | Yes | — |
| 封裝 | 8-SOIC | 8-pin SOIC, 3.90 mm width |
| Package Body Width | 0.154 inch (3.90 mm) | — |
| 安裝類型 | Surface mount | Surface mount |
| Shipping Format | Tape and reel | — |
| Product Status | Obsolete | — |
| Programmability | Not verified | — |
| Operating Voltage Range | [DATA_NEEDED: operating voltage range] | — |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | -40°C to +85°C |
| Input Clock Frequency | [DATA_NEEDED: input clock frequency range] | — |
| Output Clock Frequency | [DATA_NEEDED: output clock frequency range] | — |
| Output Drive | [DATA_NEEDED: output drive and load capability] | — |
| Jitter | [DATA_NEEDED: clock jitter specification] | — |
| 供應電流 | [DATA_NEEDED: supply current] | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Maximum Operating Frequency | — | 160 MHz |
| PLL Configuration | — | Single PLL |
| Supported Input | — | Clock or crystal input |
| 輸出類型 | — | CMOS |
| Input-to-Output Ratio | — | 1:1 |
| Number of Circuits | — | 1 |
| Differential Input | — | No |
| Differential Output | — | No |
| 供應電壓 | — | [DATA_NEEDED: supply voltage] |
| Output Frequency Range | — | [DATA_NEEDED: output frequency range] |
| Input Frequency Range | — | [DATA_NEEDED: input frequency range] |
| Output Jitter | — | [DATA_NEEDED: output jitter] |
| PLL Loop Filter | — | [DATA_NEEDED: PLL loop-filter configuration] |