INA125P vs INA125U 比較
詳細並排比較 INA125P 由 Texas Instruments 與 INA125U 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
Texas Instruments
INA125P - Precision Bridge Amplifier with 10V Reference | Texas Instruments
INA125P ✓ 啟用中
規格比較
| 參數 | INA125P | INA125U |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 類別 | Amplifier ICs | Amplifier ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | Instrumentation amplifier with precision voltage reference | Instrumentation amplifier with precision voltage reference |
| Number of Circuits | 1 circuit | — |
| Maximum Input Offset Voltage | 250 µV | — |
| Maximum Input Offset Drift | 2 µV/°C | — |
| Slew Rate | 0.02 V/µs | [DATA_NEEDED: slew rate] |
| Bandwidth | 150 kHz | 150 kHz |
| 供應電壓 | 2.7 V to 36 V | — |
| 靜態電流 | 460 µA typical | 460 µA |
| Precision Voltage Reference | 10 V | — |
| 工作溫度 | -40°C to +85°C | [DATA_NEEDED: operating temperature range] |
| 封裝 | 16-pin plastic DIP, through-hole | 16-pin SOIC |
| 安裝類型 | Through-hole | Surface mount |
| Temperature Grade | Industrial | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| Common-Mode Rejection | [DATA_NEEDED: common-mode rejection] | [DATA_NEEDED: common-mode rejection ratio] |
| Gain | [DATA_NEEDED: gain configuration and range] | — |
| Sleep Mode | Supported | Yes |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| MSL | [DATA_NEEDED: moisture sensitivity level] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Channel Count | — | 1 circuit |
| Supply Voltage Range | — | 2.7 V to 36 V |
| Maximum Supply Voltage | — | 36 V |
| Gain Range | — | 4 V/V to 10,000 V/V |
| Gain Setting | — | Single external resistor |
| Input Offset Voltage | — | 250 µV maximum |
| Input Offset Drift | — | 2 µV/°C maximum |
| Voltage Reference | — | 10 V |
| Gain Error | — | [DATA_NEEDED: gain error] |
| Noise at 1kHz | — | 38 nV/√Hz typical |