LM239N vs LM393M 比較
詳細並排比較 LM239N 由 Texas Instruments 與 LM393M 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | LM239N | LM393M |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 類別 | Amplifier ICs | Amplifier ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Comparator Type | Quad differential voltage comparator | — |
| Number of Channels | 4 independent channels | — |
| 輸出類型 | Open-collector | Open-Collector |
| Maximum Offset Voltage | 2 mV maximum | — |
| Input Bias Current | 25 nA typical | [DATA_NEEDED: input bias current] |
| Input Offset Current | [DATA_NEEDED: LM239N input offset current] | — |
| Supply Voltage Range | Wide range; related LM139/139A family specifies 2 V to 36 V DC | 2 V to 36 V |
| Single-Supply Operation | Supported | — |
| Split-Supply Operation | Supported | — |
| Low-Level Sensing | Designed for sensing near ground | — |
| Logic Compatibility | TTL, DTL, ECL, MOS, and CMOS | — |
| Typical Application | Level detection, low-level sensing, and memory applications | — |
| Power Drain | Suitable for battery operation | — |
| 工作溫度 | [DATA_NEEDED: LM239N operating temperature range] | [DATA_NEEDED: operating temperature range] |
| 封裝 | 14-pin PDIP | 8-SOIC |
| 安裝類型 | Through-hole | Surface mount |
| RoHS 狀態 | [DATA_NEEDED: LM239N RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: LM239N REACH status] | [DATA_NEEDED: REACH status] |
| Automotive Qualification | [DATA_NEEDED: LM239N AEC-Q100 qualification] | — |
| Product Type | — | Dual differential comparator |
| Number of Comparator Channels | — | 2 |
| Comparator Class | — | Standard general purpose |
| Response Time | — | 1.4 microseconds |
| 腳位數 | — | 8 pins |
| Supply Configuration | — | Single or dual supply |
| Input Configuration | — | Differential input |
| Output Pull-Up | — | External pull-up resistor required |
| Output Current | — | 18 mA at 5 V |
| Case Style | — | SOIC-8 |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Offset Voltage | — | [DATA_NEEDED: input offset voltage] |