LM2901NG vs LM2901N 比較
詳細並排比較 LM2901NG 由 onsemi 與 LM2901N 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
規格比較
| 參數 | LM2901NG | LM2901N |
|---|---|---|
| 品牌 | onsemi | Texas Instruments |
| 類別 | Amplifier ICs | Amplifier ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Comparator Type | Quad differential comparator | Quad differential comparator |
| Number of Channels | 4 channels | 4 channels |
| Supply Voltage Range | 3 V to 36 V | — |
| Supply Configuration | Single supply | Single or split supply |
| 輸出類型 | Open collector | Open collector |
| Logic Compatibility | TTL and CMOS | TTL, DTL, MOS, ECL, and CMOS output compatibility |
| Output Saturation Voltage | 130 mV at 4 mA | [DATA_NEEDED: output saturation voltage] |
| Common-Mode Input Range | Includes ground | — |
| 工作溫度範圍 | -40°C to 105°C | — |
| Input ESD Protection | ESD clamps on inputs | — |
| Package Type | 14-pin PDIP | — |
| 安裝類型 | Through-hole | Through hole |
| Manufacturer | onsemi | — |
| Device Classification | Standard general-purpose comparator | — |
| Typical Applications | Level detection, low-level sensing, and memory applications | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | 25 nA typical |
| 供應電流 | [DATA_NEEDED: supply current] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Differential Input Voltage | [DATA_NEEDED: differential input voltage] | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | not_applicable |
| Maximum Supply Voltage | — | 36 V |
| Input Offset Current | — | ±5.0 nA typical |
| Supply Current Drain | — | 800 µA typical |
| 封裝 | — | 14-pin DIP |
| 工作溫度 | — | -40 °C to +85 °C |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Response Time | — | [DATA_NEEDED: comparator response time] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |