LM2901NG vs LM2901NG4 比較
詳細並排比較 LM2901NG 由 onsemi 與 LM2901NG4 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
規格比較
| 參數 | LM2901NG | LM2901NG4 |
|---|---|---|
| 品牌 | onsemi | Texas Instruments |
| 類別 | Amplifier ICs | Amplifier ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Comparator Type | Quad differential comparator | Quad differential comparator |
| Number of Channels | 4 channels | 4 channels |
| Supply Voltage Range | 3 V to 36 V | — |
| Supply Configuration | Single supply | — |
| 輸出類型 | Open collector | Open collector |
| Logic Compatibility | TTL and CMOS | TTL, MOS, and CMOS compatible |
| Output Saturation Voltage | 130 mV at 4 mA | [DATA_NEEDED: output saturation voltage] |
| Common-Mode Input Range | Includes ground | — |
| 工作溫度範圍 | -40°C to 105°C | -40 °C to 125 °C |
| Input ESD Protection | ESD clamps on inputs | — |
| Package Type | 14-pin PDIP | — |
| 安裝類型 | Through-hole | — |
| Manufacturer | onsemi | — |
| Device Classification | Standard general-purpose comparator | — |
| Typical Applications | Level detection, low-level sensing, and memory applications | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Input Bias Current | [DATA_NEEDED: input bias current] | [DATA_NEEDED: input bias current] |
| 供應電流 | [DATA_NEEDED: supply current] | [DATA_NEEDED: supply current] |
| Propagation Delay | [DATA_NEEDED: propagation delay] | [DATA_NEEDED: propagation delay] |
| Differential Input Voltage | [DATA_NEEDED: differential input voltage] | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification status] |
| Supply Voltage Range, Single Supply | — | 2 V to 30 V |
| Supply Voltage Range, Dual Supply | — | ±1 V to ±15 V |
| 封裝 | — | 14-PDIP, 0.300 inch pitch, 7.62 mm |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Differential Input Voltage Range | — | [DATA_NEEDED: differential input voltage range] |
| Output Pull-Up Requirement | — | External pull-up resistor required |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance status] |