LM2902VN vs LM2902NS 比較

詳細並排比較 LM2902VN 由 onsemi 與 LM2902NS 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

onsemi
LM2902VN LM2902VN - Quad Low-Power Op-Amp, 3-32V | onsemi

LM2902VN - Quad Low-Power Op-Amp, 3-32V | onsemi

LM2902VN ✓ 啟用中
Texas Instruments
LM2902NS LM2902NS - Quad 26V 1.2MHz Op Amp | Texas Instruments

LM2902NS - Quad 26V 1.2MHz Op Amp | Texas Instruments

LM2902NS ✓ 啟用中

規格比較

參數 LM2902VN LM2902NS
品牌 onsemi Texas Instruments
類別 Amplifier ICs Amplifier ICs
生命週期狀態 啟用中 啟用中
Amplifier Configuration Quad (4 independent amplifiers) —
Amplifier Type General-purpose, single-supply operational amplifier General-purpose operational amplifier
Supply Voltage Range (single) 3 V to 32 V —
Supply Voltage Range (dual) ±1.5 V to ±16 V —
Supply Voltage (alternate listing) 3 V to 26 V —
Open-Loop Voltage Gain 70 dB —
Input Bias Current 0.5 uA [DATA_NEEDED: input bias current]
Input Offset Current [DATA_NEEDED: input offset current] —
Input Offset Voltage [DATA_NEEDED: input offset voltage] 2 mV maximum
Gain Bandwidth Product [DATA_NEEDED: gain bandwidth product] —
Slew Rate [DATA_NEEDED: slew rate] [DATA_NEEDED: slew rate]
Input Common-Mode Range Includes negative rail (ground-sensing inputs) —
Output Short-Circuit Current [DATA_NEEDED: output short-circuit current] —
腳位數 14 14 pins
封裝 PDIP-14 (0.300 in, 7.62 mm) 14-SO
安裝類型 Through Hole Surface mount
工作溫度範圍 [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
RoHS 狀態 [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
Number of Circuits — 4 circuits
Maximum Supply Voltage — 26 V
Gain-Bandwidth Product — 1.2 MHz
輸出類型 — [DATA_NEEDED: output type]
Input Common-Mode Voltage Range — [DATA_NEEDED: input common-mode voltage range]
Output Voltage Swing — [DATA_NEEDED: output voltage swing]
Quiescent Current per Amplifier — [DATA_NEEDED: quiescent current per amplifier]
REACH Status — [DATA_NEEDED: REACH status]
Lead-Free Status — [DATA_NEEDED: lead-free status]

資料表與資源

瀏覽所有產品 建立 BOM 索取報價