LM2903DG vs LM2903DR2 比較
詳細並排比較 LM2903DG 由 onsemi 與 LM2903DR2 由 onsemi. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
規格比較
| 參數 | LM2903DG | LM2903DR2 |
|---|---|---|
| 品牌 | onsemi | onsemi |
| 類別 | Amplifier ICs | Amplifier ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Number of Channels | 2 (dual independent comparators) | 2 channels |
| Comparator Type | General purpose, differential | Dual differential voltage comparator |
| 輸出類型 | Open-collector, rail-to-rail output swing | Open-collector |
| Supply Voltage Range (Single) | 2 V to 36 V | — |
| Supply Voltage Range (Split) | +/-1 V to +/-18 V | — |
| Input Offset Voltage (Typ) | 2 mV | — |
| Response Time / Propagation Delay | 1.3 us (typical) | — |
| Supply Current per Comparator | 0.4 mA (typical, largely independent of VCC) | — |
| Common-Mode Input Range | Includes ground (negative rail) in single-supply operation | Extended to ground with single-supply operation |
| Maximum Supply Voltage Rating | 36 V (V-suffix devices tested to 32 V) | — |
| Minimum VCC Above Common-Mode | 1.5 V | — |
| 工作溫度範圍 | -40C to +105C | [DATA_NEEDED: operating temperature range] |
| 封裝 | SOIC-8 (D suffix), 8 pins | 8-pin SOIC |
| 安裝類型 | Surface Mount | Surface mount |
| Description Category | Low Offset Voltage Dual Comparators | — |
| Supply Voltage Range | — | 2 V to 36 V |
| Supply Configuration | — | Single or split supply |
| Input Offset Voltage | — | As low as 2.0 mV |
| 腳位數 | — | 8 pins |
| Comparator Independence | — | 2 independent channels |
| Logic Compatibility | — | Compatible with TTL, MOS, and CMOS interfaces |
| Differential Input Voltage | — | [DATA_NEEDED: differential input voltage range] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| 供應電流 | — | [DATA_NEEDED: supply current per channel] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Output Saturation Voltage | — | [DATA_NEEDED: output saturation voltage] |
| RoHS 狀態 | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |