LM2904PWRG3 vs LM2904BQPWRQ1 比較
詳細並排比較 LM2904PWRG3 由 Texas Instruments 與 LM2904BQPWRQ1 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
規格比較
| 參數 | LM2904PWRG3 | LM2904BQPWRQ1 |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 類別 | Amplifier ICs | Amplifier ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Amplifier Type | General Purpose | General-purpose operational amplifier |
| Number of Amplifiers | 2 circuits | — |
| Architecture | Two independent, frequency-compensated operational amplifiers | — |
| Maximum Total Supply Voltage | 26 V | — |
| Gain-Bandwidth Product | 700 kHz | 1.2 MHz |
| Slew Rate | 0.3 V/us | 0.5 V/µs |
| Typical Supply Current | 0.7 mA | — |
| Supply Configuration | Single supply or split supply | — |
| 封裝 | 8-TSSOP (PW), 0.173 in / 4.40 mm width | 8-pin TSSOP |
| 安裝類型 | Surface Mount | Surface mount |
| Packaging | Tape and Reel (TR) | — |
| Temperature Range | [DATA_NEEDED: operating temperature range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage and test conditions] |
| Input Bias Current | [DATA_NEEDED: input bias current] | 10 nA |
| Open-Loop Gain | [DATA_NEEDED: open-loop gain] | [DATA_NEEDED: minimum open-loop gain and test conditions] |
| Common-Mode Input Voltage Range | [DATA_NEEDED: common-mode input voltage range] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | [DATA_NEEDED: output voltage swing and load conditions] |
| Short-Circuit Protection | [DATA_NEEDED: short-circuit protection configuration] | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | AEC-Q100 qualified |
| Number of Channels | — | 2 channels |
| Maximum Supply Voltage | — | 36 V |
| 工作溫度範圍 | — | -40°C to 125°C |
| 供應電壓 | — | [DATA_NEEDED: minimum and maximum recommended operating supply voltage] |
| Input Common-Mode Voltage Range | — | [DATA_NEEDED: input common-mode voltage range] |
| Output Current | — | [DATA_NEEDED: output current capability] |
| Total quiescent Current | — | [DATA_NEEDED: typical quiescent current] |
| 雜訊密度 | — | [DATA_NEEDED: input noise density] |