LM339N vs LM339D 比較
詳細並排比較 LM339N 由 Texas Instruments 與 LM339D 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | LM339N | LM339D |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 類別 | Amplifier ICs | Amplifier ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Comparator Type | Quad differential comparator | — |
| Number of Channels | 4 | — |
| Supply Voltage Range | 2 V to 36 V | — |
| Differential Input Voltage Range | +/- 1 V to +/- 18 V | — |
| Response Time | 1.3 microseconds | 1 µsec |
| 輸出類型 | Open-collector | Open-collector |
| 封裝 | 14-pin PDIP | 14-pin SOIC |
| 安裝類型 | Through-hole | — |
| Comparator Configuration | Four independent comparators | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 0.37 mV |
| Input Bias Current | [DATA_NEEDED: input bias current] | 3.5 nA |
| Output Sink Current | [DATA_NEEDED: output sink current] | [DATA_NEEDED: output sink current] |
| Output Saturation Voltage | [DATA_NEEDED: output saturation voltage] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode range] | — |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Quiescent Supply Current | [DATA_NEEDED: quiescent supply current] | — |
| External Pull-Up Resistor | Required for open-collector output | — |
| Manufacturer Classification | Low Power Low Offset Voltage Quad Comparator | — |
| Datasheet Availability | Manufacturer product page and datasheet referenced | — |
| Comparator Count | — | 4 |
| Product Type | — | General-purpose differential voltage comparator |
| Supply Operation | — | Single or split supply |
| Maximum Rated Supply Voltage | — | Up to 38 V |
| 供應電流 | — | 200 µA per comparator |
| ESD Rating HBM | — | 2 kV |
| Logic Compatibility | — | TTL, MOS, and CMOS-compatible output |
| Common-Mode Input Range | — | [DATA_NEEDED: common-mode input voltage range] |
| Input Common-Mode Voltage | — | [DATA_NEEDED: input common-mode voltage] |
| RoHS 狀態 | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |