LT1007CJ8 vs LT1012CJ8 比較
詳細並排比較 LT1007CJ8 由 Analog Devices 與 LT1012CJ8 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
規格比較
| 參數 | LT1007CJ8 | LT1012CJ8 |
|---|---|---|
| 品牌 | Analog Devices | Analog Devices |
| 類別 | Amplifier ICs | Amplifier ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Amplifier Type | Single operational amplifier | — |
| Number of Circuits | 1 circuit | — |
| Wideband Input Noise Density | 2.5 nV/√Hz | — |
| Guaranteed 10 Hz Noise Density | 4.5 nV/√Hz | — |
| Guaranteed 1 kHz Noise Density | 3.8 nV/√Hz | — |
| 0.1 Hz to 10 Hz Noise | 60 nV peak-to-peak typical | — |
| 1/f Corner Frequency | 2 Hz | — |
| Input Offset Voltage | 10 µV | [DATA_NEEDED: input offset voltage] |
| Input Offset Drift | 0.2 µV/°C | — |
| Common-Mode Rejection Ratio | 130 dB | [DATA_NEEDED: common-mode rejection ratio] |
| Power-Supply Rejection Ratio | 130 dB | [DATA_NEEDED: power-supply rejection ratio] |
| LT1037 Gain-Bandwidth Product | 60 MHz | — |
| Minimum Stable Closed-Loop Gain | 5 | — |
| Minimum Voltage Gain | 2 million typical | — |
| 封裝 | 8-pin CERDIP | 8-pin CERDIP (CDIP) |
| 安裝類型 | Through-hole | Through-hole |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | 55 C to 125 C stated for maintained bias-current performance |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | [DATA_NEEDED: slew rate] |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Product Type | — | 1-circuit precision operational amplifier |
| Compensation | — | Internally compensated |
| 供應電壓 | — | ±20 V maximum |
| Bias Current | — | Picoampere class |
| Voltage Gain | — | 1,000,000 V/V |
| Load Current | — | 5 mA |
| Power Dissipation | — | 1 mW on two Ni-Cad batteries |
| Warm-Up Drift | — | [DATA_NEEDED: warm-up drift] |
| Open-Loop Gain | — | [DATA_NEEDED: open-loop gain] |
| Gain-Bandwidth Product | — | [DATA_NEEDED: gain-bandwidth product] |
| Package Body Width | — | 0.300 in (7.62 mm) |