MAX13487EESA+T vs MAX135EWI 比較
詳細並排比較 MAX13487EESA+T 由 Analog Devices 與 MAX135EWI 由 Maxim Integrated. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
Analog Devices
MAX13487EESA+T - 5V RS-485/RS-422 Transceiver | Maxim Integrated
MAX13487EESA+T ✓ 啟用中規格比較
| 參數 | MAX13487EESA+T | MAX135EWI |
|---|---|---|
| 品牌 | Analog Devices | Maxim Integrated |
| 類別 | USB Interface ICs | ADC/DAC |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | Half-Duplex RS-485/RS-422 Transceiver | — |
| Direction Control | AutoDirection (automatic) | — |
| 供應電壓 | +5 V | [DATA_NEEDED: supply voltage range] |
| 資料速率 | 500 kbps | — |
| Drivers / Receivers | 1 / 1 | — |
| Duplex Mode | Half | — |
| ESD Protection | +/-15 kV (HBM) | — |
| Hot-Swap Capability | Yes | — |
| Fail-Safe Receiver | Yes (short, open, idle) | — |
| Logic Pin Voltage Range (/SHDN, /RE, /DI) | -0.3 V to +6 V | — |
| 封裝 | 8-SOIC (0.154 in / 3.90 mm width), NSOIC | 28-pin wide SOIC (SOIC-Wide-28), gull wing |
| 安裝類型 | Surface Mount | Surface Mount (SMD/SMT) |
| 工作溫度 | [DATA_NEEDED: operating temperature range] | — |
| 靜態電流 | [DATA_NEEDED: supply current] | — |
| Receiver Input Impedance | 1/8 unit load (256 transceivers on bus) | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | unknown |
| Reel Packaging | Tape and Reel (+T suffix) | — |
| Converter Type | — | Multi-slope integrating ADC (CMOS) |
| 解析度 | — | 15 bits |
| Number of Channels | — | 1 input |
| Conversion Rate | — | 16 conversions/second |
| Output Format | — | Binary, parallel output |
| Architecture | — | Multi-slope integration with dual-slope correction |
| Technology | — | CMOS |
| Input Type | — | Single-ended, single channel |
| Analog Input Range | — | [DATA_NEEDED: analog input voltage range] |
| Input Impedance | — | [DATA_NEEDED: input impedance] |
| Integral Non-Linearity | — | [DATA_NEEDED: INL] |
| Offset Error | — | [DATA_NEEDED: offset error] |
| Noise Performance | — | [DATA_NEEDED: rms noise and noise rejection] |
| Power Consumption | — | [DATA_NEEDED: supply current and power dissipation] |
| 腳位數 | — | 28 |
| Temperature Grade | — | Industrial (-40 C to +85 C) |
| Package Dimensions | — | [DATA_NEEDED: package body dimensions] |
| REACH Status | — | unknown |
| AEC-Q100 Qualification | — | not_applicable |