MAX14882AWE+T vs MAX14821ETG+ 比較
詳細並排比較 MAX14882AWE+T 由 Analog Devices 與 MAX14821ETG+ 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
Analog Devices
MAX14821ETG+ - IO-Link Device Transceiver, 24-TQFN | Analog Devices
MAX14821ETG+ ✓ 啟用中規格比較
| 參數 | MAX14882AWE+T | MAX14821ETG+ |
|---|---|---|
| 品牌 | Analog Devices | Analog Devices |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| 功能 | Isolated high-speed CAN transceiver | — |
| 資料速率 | 1 Mbps | — |
| Isolation Voltage | 5 kVRMS | — |
| Controller-side Supply (VDDA) | 3.0 V to 5.5 V | — |
| Bus-side Supply (VDDB) | 4.5 V to 5.5 V | — |
| Receiver Input Common-Mode Range | -25 V to +25 V | — |
| Bus Fault Tolerance (CANH/CANL) | +/-54 V | — |
| ESD Protection (Bus-side, HBM) | +/-15 kV | — |
| Integrated LDO Output Current | 300 mA (max), 130 mA to internal load | — |
| Number of Drivers/Receivers | 1/1 (Half-Duplex CAN) | — |
| 工作溫度範圍 | -40 C to +125 C | — |
| 封裝 | 16-pin Wide-body SOIC (W SOIC) | TQFN-24 (4x4 mm) |
| Creepage and Clearance | 8 mm | — |
| 安裝類型 | Surface Mount | Surface Mount |
| Standard | ISO 11898-2 compliant CAN | — |
| RoHS 狀態 | Compliant | — |
| Product Type | — | IO-Link Device Transceiver |
| Supply Voltage (VSUP) | — | 9 V to 36 V |
| Number of Transceivers | — | 1/1 |
| IO-Link Data Rates | — | COM1 4.8 kbps / COM2 38.4 kbps / COM3 230.4 kbps |
| C/Q Driver Configuration | — | Push-pull, high-side (PNP), or low-side (NPN), independently configurable |
| DO Driver Configuration | — | Push-pull, high-side (PNP), or low-side (NPN), independently configurable |
| Wake-up Output (WU) | — | Active-low, generated on C/Q wake-up detection |
| Internal Linear Regulators | — | Two LDOs (3.3 V and 5 V typical) |
| Digital Inputs (DI) | — | 24 V digital input with selectable current load |
| Digital Outputs (DO) | — | 24 V digital output driver |
| 工作溫度 | — | -40 C to +85 C |
| Compliance | — | IO-Link (IEC 61131-9) |
| ESD Protection | — | Integrated for industrial 24V port |