MAX232ECPE+ vs MAX232EEPE+ 比較
詳細並排比較 MAX232ECPE+ 由 Analog Devices 與 MAX232EEPE+ 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
規格比較
| 參數 | MAX232ECPE+ | MAX232EEPE+ |
|---|---|---|
| 品牌 | Analog Devices | Analog Devices |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Device Type | Dual RS-232 transceiver | — |
| Transmit Channels | 2 | — |
| Receive Channels | 2 | — |
| Supply Voltage Range | 4.5V to 5.5V | — |
| Maximum Data Rate | 120kbps | 120 kbps |
| Supported Standards | EIA/TIA-232E and CCITT V.28 | — |
| ESD Protection | 15kV HBM | 15 kV |
| Charge Pump | Integrated charge-pump circuitry | — |
| Negative Supply Requirement | No separate negative supply; external capacitors required | — |
| Logic Compatibility | TTL/CMOS interface | TTL/CMOS-compatible RS-232 interface |
| 封裝 | 16-pin PDIP, 0.300 inch, 7.62mm | 16-pin PDIP |
| 安裝類型 | Through-hole | Through-hole DIP |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Driver Output Voltage | [DATA_NEEDED: RS-232 driver output voltage] | — |
| Receiver Input Voltage Range | [DATA_NEEDED: RS-232 receiver input voltage range] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| 靜態電流 | [DATA_NEEDED: quiescent current] | — |
| External Charge-Pump Capacitors | [DATA_NEEDED: charge-pump capacitor values] | — |
| RoHS 狀態 | unknown | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | unknown | [DATA_NEEDED: REACH compliance status] |
| AEC-Q100 Qualification | not_applicable | — |
| Product Type | — | RS-232 transceiver |
| 供應電壓 | — | 5 V |
| Transmitter Count | — | 2 |
| Receiver Count | — | 2 |
| Interface Standard | — | EIA/TIA-232E and CCITT V.28 |
| 腳位數 | — | 16 pins |
| Power-Supply Topology | — | Single 5 V supply with integrated RS-232 charge-pump voltage generation |
| 供應電流 | — | [DATA_NEEDED: typical and maximum supply current] |
| Transmitter Output Levels | — | [DATA_NEEDED: RS-232 output voltage levels] |
| Receiver Input Threshold | — | [DATA_NEEDED: receiver threshold and hysteresis] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |