MAX303CPE+ vs DG409DJ+ 比較
詳細並排比較 MAX303CPE+ 由 Analog Devices 與 DG409DJ+ 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
規格比較
| 參數 | MAX303CPE+ | DG409DJ+ |
|---|---|---|
| 品牌 | Analog Devices | Analog Devices |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Device Type | Precision, dual, high-speed analog switch | — |
| Number of Channels | 2 channels | — |
| Switch Configuration | 2:1 SPDT per channel | — |
| On-Resistance | Less than 35 ohm | 100 ohm |
| On-Resistance Matching Between Channels | Within 2 ohm | — |
| Normally Open Paths | 2 paths | — |
| Normally Closed Paths | 2 paths | — |
| Leakage Current at 25°C | Less than 250 pA | — |
| Leakage Current at 85°C | Less than 6 nA | — |
| Positive Supply Voltage | 10 V to 30 V | — |
| Negative Supply Voltage | -4.5 V to -20 V | — |
| 封裝 | 16-pin plastic DIP | 16-pin PDIP |
| 安裝類型 | Through-hole | Through-hole |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Switching Time | [DATA_NEEDED: switching time] | — |
| Channel-to-Channel Capaciticity | [DATA_NEEDED: channel-to-channel capacitance] | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Product Type | — | Dual 4-channel CMOS analog multiplexer |
| Multiplexer Configuration | — | 4:1 |
| Number of Circuits | — | 2 circuits |
| Number of Channels per Circuit | — | 4 channels |
| Supply Voltage Range | — | 5 V to 30 V |
| Maximum Charge Injection | — | 15 pC |
| Input Off-Leakage Current | — | Less than 5 nA at 85 C |
| ESD Protection | — | Greater than 2000 V |
| Signal Conduction Direction | — | Bidirectional |
| Control Logic Compatibility | — | TTL/CMOS-compatible |
| Channel Matching | — | 8 ohm maximum |
| Flatness Over Signal Range | — | 9 ohm maximum |
| Primary Applications | — | Audio-signal routing, communication systems, data acquisition, guidance and control systems, sample-and-hold circuits, test equipment |