MAX3485CPA+ vs MAX3485ECPA+ 比較
詳細並排比較 MAX3485CPA+ 由 Maxim Integrated 與 MAX3485ECPA+ 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
規格比較
| 參數 | MAX3485CPA+ | MAX3485ECPA+ |
|---|---|---|
| 品牌 | Maxim Integrated | Analog Devices |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 transceiver |
| 供應電壓 | 3.3 V | 3.3 V |
| 資料速率 | Up to 10 Mbps | — |
| Driver and Receiver Count | 1 driver and 1 receiver | — |
| Communication Standard | RS-485 and RS-422 | — |
| Driver Architecture | Slew-rate limited | Slew-rate-limited |
| 封裝 | 8-pin PDIP | 8-pin PDIP |
| 安裝類型 | Through hole | Through-hole |
| Transceiver Configuration | Half-duplex transceiver | 1 driver / 1 receiver |
| Low-Power Operation | 3.3 V low-power transceiver | — |
| EMI and Reflection Control | Slew-rate-limited driver intended to minimize EMI and cable reflections | — |
| 工作溫度 | [DATA_NEEDED: operating temperature range] | — |
| ESD Protection | [DATA_NEEDED: device ESD rating] | ±15 kV |
| 供應電流 | [DATA_NEEDED: typical and maximum supply current] | [DATA_NEEDED: supply current] |
| Driver Differential Output | [DATA_NEEDED: differential output voltage specifications] | — |
| Receiver Input Range | [DATA_NEEDED: receiver differential input range] | — |
| Common-Mode Range | [DATA_NEEDED: receiver common-mode voltage range] | — |
| Slew Rate | [DATA_NEEDED: driver slew-rate value] | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Maximum Data Rate | — | 12 Mbps |
| Communication Mode | — | Half-duplex |
| Supported Standards | — | RS-422 and RS-485 |
| ESD Protection Level | — | ±15 kV |
| 工作溫度範圍 | — | [DATA_NEEDED: operating temperature range] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Differential Threshold | — | [DATA_NEEDED: receiver differential threshold] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Shutdown Supply Current | — | [DATA_NEEDED: shutdown supply current] |