MAX3488CSA+T vs MAX3488CSA+ 比較
詳細並排比較 MAX3488CSA+T 由 Analog Devices 與 MAX3488CSA+ 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
Analog Devices
MAX3488CSA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3488CSA+ ✓ 啟用中規格比較
| 參數 | MAX3488CSA+T | MAX3488CSA+ |
|---|---|---|
| 品牌 | Analog Devices | Analog Devices |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | RS-485/RS-422 transceiver | RS-485/RS-422 transceiver |
| Number of Drivers | 1 driver | — |
| Number of Receivers | 1 receiver | — |
| Supply Voltage Range | 3 V to 3.6 V | — |
| Maximum Data Rate | 10 Mbps | 10 Mbps |
| Driver Edge Rate | Slew-rate limited | — |
| Supported Protocols | RS-422 and RS-485 | — |
| 封裝 | 8-SOIC, 0.154 m body width and 3.90 mm overall width | 8-pin NSOIC |
| 腳位數 | 8 pins | — |
| 安裝類型 | Surface mount | Surface mount |
| Packaging | Tape and reel | — |
| 工作溫度範圍 | 0°C to +70°C | — |
| EMI Control | Slew-rate-limited driver reduces EMI | Slew-rate-limited driver intended to reduce EMI |
| Cable Reflection Control | Reduced reflections from slew-rate limiting | Slew-rate-limited driver intended to reduce reflections |
| Logic Compatibility | 3.3V transceiver interface | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | [DATA_NEEDED: REACH status] |
| 供應電壓 | — | 3.3 V |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Driver Edge Control | — | Slew-rate limited |
| Communication Standard | — | RS-485/RS-422 |
| Low-Power Family | — | 3.3 V, low-power transceiver |
| Application Topology | — | RS-422 point-to-point and RS-485 multidrop |
| Differential Signal | — | Balanced line signaling |
| Logic Interface | — | Digital logic-level driver and receiver |
| Manufacturer Product Status | — | Production |
| Manufacturer Data Sheet Revision | — | Rev. 2 |
| 工作溫度 | — | [DATA_NEEDED: operating temperature range] |
| ESD Rating | — | [DATA_NEEDED: ESD rating] |
| Typical Quiescent Current | — | [DATA_NEEDED: quiescent current] |
| Output Differential Voltage | — | [DATA_NEEDED: output differential voltage] |
| Receiver Input Impedance | — | [DATA_NEEDED: receiver input impedance] |
| Isolation | — | [DATA_NEEDED: isolation rating] |