MAX3488ECPA+ vs MAX3488CPA+ 比較
詳細並排比較 MAX3488ECPA+ 由 Analog Devices 與 MAX3488CPA+ 由 Maxim Integrated. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | MAX3488ECPA+ | MAX3488CPA+ |
|---|---|---|
| 品牌 | Analog Devices | Maxim Integrated |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| 供應電壓 | 3.3 V | 3.3 V |
| Maximum Data Rate | 12 Mbps | 10 Mbps |
| ESD Protection | ±15 kV | [DATA_NEEDED: ESD protection rating] |
| Supported Standards | RS-422/RS-485 | — |
| Transceiver Configuration | 1 transmitter and 1 receiver | — |
| Driver Type | Slew-rate-limited true RS-485/RS-422 | — |
| Receiver Type | Differential RS-422/RS-485 receiver | — |
| 封裝 | 8-pin PDIP | 8-pin PDIP |
| 安裝類型 | Through-hole | Through-hole |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | — |
| 供應電流 | [DATA_NEEDED: supply current] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Receiver Input Sensitivity | [DATA_NEEDED: receiver input sensitivity] | [DATA_NEEDED: receiver input sensitivity] |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | [DATA_NEEDED: common-mode voltage range] |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Shutdown Function | [DATA_NEEDED: shutdown function] | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| Tube Quantity | 1 tube | — |
| Product Type | — | RS-485/RS-422 transceiver |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Interface Standards | — | RS-485 and RS-422 |
| Slew Rate | — | Slew-rate limited |
| Logic Compatibility | — | +5 V logic interoperable |
| 工作溫度 | — | [DATA_NEEDED: operating temperature range] |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Differential Output Voltage | — | [DATA_NEEDED: differential output voltage] |
| 靜態電流 | — | [DATA_NEEDED: quiescent current] |
| Driver Enable Control | — | [DATA_NEEDED: enable-control configuration] |
| Receiver Output Logic | — | [DATA_NEEDED: receiver output logic] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |