MAX3490AEGSA+ vs MAX3485ECSA+ 比較

詳細並排比較 MAX3490AEGSA+ 由 Analog Devices 與 MAX3485ECSA+ 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

Analog Devices
MAX3485ECSA+ MAX3485ECSA+ - 12Mbps 3.3V RS-485/RS-422 Transceiver

MAX3485ECSA+ - 12Mbps 3.3V RS-485/RS-422 Transceiver

MAX3485ECSA+ ✓ 啟用中

規格比較

參數 MAX3490AEGSA+ MAX3485ECSA+
品牌 Analog Devices Analog Devices
類別 Interface ICs Interface ICs
生命週期狀態 啟用中 啟用中
Product Type Full-duplex RS-485/RS-422 transceiver Half-duplex RS-485/RS-422 transceiver
供應電壓 3.3 V nominal 3.3 V
Operating Supply Range 3.0 V to 3.6 V —
Maximum Data Rate 20 Mbps 12 Mbps
Driver Configuration Slew-rate-limited —
ESD Protection ±20 kV ±15 kV
Number of Drivers 1 —
Number of Receivers 1 —
Communication Mode Full duplex —
Supported Standards RS-485 and RS-422 RS-485 and RS-422
封裝 8-pin SOIC 8-pin SOIC
安裝類型 Surface mount Surface mount
Manufacturer Analog Devices / Maxim Integrated —
Product Lifecycle Production —
工作溫度範圍 [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
供應電流 [DATA_NEEDED: supply current] [DATA_NEEDED: typical and maximum supply current]
Receiver Fail-Safe Bias [DATA_NEEDED: receiver fail-safe bias] —
Common-Mode Voltage Range [DATA_NEEDED: common-mode voltage range] [DATA_NEEDED: common-mode voltage range]
RoHS 狀態 [DATA_NEEDED: RoHS status] unknown
REACH Status [DATA_NEEDED: REACH status] unknown
Driver/Receiver Count — 1 driver and 1 receiver
Driver Edge Control — Slew-rate limited
Driver Output Current — [DATA_NEEDED: differential output current]
Receiver Input Sensitivity — [DATA_NEEDED: differential input sensitivity]
Driver Propagation Delay — [DATA_NEEDED: driver propagation delay]
Receiver Propagation Delay — [DATA_NEEDED: receiver propagation delay]
Shutdown and Enable Control — [DATA_NEEDED: DE and active-low RE control details]
AEC-Q100 Qualification — unknown

資料表與資源

瀏覽所有產品 建立 BOM 索取報價