MAX485CPA+ vs SP485CN-L 比較
詳細並排比較 MAX485CPA+ 由 Analog Devices 與 SP485CN-L 由 MaxLinear. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | MAX485CPA+ | SP485CN-L |
|---|---|---|
| 品牌 | Analog Devices | MaxLinear |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | RS-485/RS-422 low-power transceiver | — |
| Driver Count | 1 | 1 |
| Receiver Count | 1 | 1 |
| Communication Mode | Half-duplex | — |
| Supported Standards | RS-485 and RS-422 | — |
| Signal Type | Differential | — |
| Slew Rate | Slew-rate-limited | — |
| 封裝 | 8-pin PDIP | 8-pin SOIC |
| 安裝類型 | Through-hole | Surface Mount |
| 供應電壓 | [DATA_NEEDED: supply voltage] | — |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | 5 Mbps |
| Driver Output Current | [DATA_NEEDED: driver output current] | [DATA_NEEDED: driver output current] |
| Receiver Input Impedance | [DATA_NEEDED: receiver input impedance] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: common-mode voltage range] | — |
| Quiescent Supply Current | [DATA_NEEDED: quiescent supply current] | — |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | — |
| RoHS 狀態 | unknown | [DATA_NEEDED: RoHS status] |
| REACH Status | unknown | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | unknown | not_applicable |
| Lead-Free Status | unknown | [DATA_NEEDED: lead-free status] |
| Transceiver Type | — | Single transmitter/single receiver half-duplex transceiver |
| Supported Protocols | — | RS-422 and RS-485 |
| Supply Voltage Range | — | 4.75 V to 5.25 V |
| Logic and Bus Function | — | Bidifferential half-duplex serial interface |
| Architecture | — | BiCMOS |
| Power Class | — | Low-power operation |
| Temperature Range | — | 0 C to 70 C |
| Bus Topology | — | Half-duplex differential bus |
| Signaling | — | Differential RS-422/RS-485 |
| EMI Behavior | — | [DATA_NEEDED: slew-rate and transient-emission details] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver sensitivity] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| 靜態電流 | — | [DATA_NEEDED: quiescent current] |
| Termination Requirement | — | [DATA_NEEDED: manufacturer termination and biasing guidance] |