MC1488N vs MC1488P 比較
詳細並排比較 MC1488N 由 Texas Instruments 與 MC1488P 由 STMicroelectronics. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | MC1488N | MC1488P |
|---|---|---|
| 品牌 | Texas Instruments | STMicroelectronics |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | Quadruple RS-232 line driver | Monolithic quadruple RS-232 line driver |
| Driver Channel Count | 4 channels | 4 channels |
| Logic and Supply | 5 V | — |
| Output Current | 10 mA typical current-limited output | — |
| Power-Off Output Impedance | 300 ohm minimum | — |
| Slew Rate Control | Controlled by load capacitance | — |
| Compliance | ANSI EIA/TIA-232-E and ITU-T Recommendation V.28 | — |
| 工作溫度範圍 | 0 degrees C to 70 degrees C | [DATA_NEEDED: operating temperature range] |
| 封裝 | 14-pin PDIP, 0.300 inch pitch, 7.62 mm | 14-pin PDIP |
| 腳位數 | 14 pins | — |
| 安裝類型 | Through-hole | — |
| Supply-Voltage Protection | Series diode at each supply-voltage terminal | — |
| Original-Design Compatibility | Designed to be interchangeable with Motorola MC1488 | — |
| RoHS 狀態 | [DATA_NEEDED: MC1488N RoHS compliance status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: MC1488N REACH compliance status] | [DATA_NEEDED: REACH status] |
| Lead-Free Status | [DATA_NEEDED: MC1488N lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: MC1488N halogen-free status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: MC1488N AEC-Q100 qualification status] | not_applicable |
| Receiver Channel Count | — | 0 channels |
| Interface Standard | — | EIA RS-232C and EIA-232D |
| Typical Output Current | — | ±10 mA |
| Power-Off Source Impedance | — | 300 ohm minimum |
| Logic Direction | — | Unidirectional driver |
| Operating Voltage Range | — | [DATA_NEEDED: operating voltage range] |
| Positive Supply Voltage | — | [DATA_NEEDED: positive supply voltage] |
| Negative Supply Voltage | — | [DATA_NEEDED: negative supply voltage] |
| 輸出電壓範圍 | — | [DATA_NEEDED: output voltage range] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Absolute Maximum Ratings | — | [DATA_NEEDED: absolute maximum ratings] |