MC3487DR vs MC3486DR 比較
詳細並排比較 MC3487DR 由 Texas Instruments 與 MC3486DR 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
Texas Instruments
MC3487DR - 4-Channel RS-422 Driver | Texas Instruments | 5V (Tape & Reel)
MC3487DR ⚠ 最後購買機會Texas Instruments
MC3486DR - 4-Channel RS-422/423 Receiver | Texas Instruments (Tape & Reel)
MC3486DR Unknown規格比較
| 參數 | MC3487DR | MC3486DR |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 最後購買 | Unknown |
| Product Type | Quadruple differential line driver | Quadruple differential line receiver |
| Number of Drivers | 4 | — |
| 供應電壓 | 5 V single supply | 5 V single supply |
| Supply Voltage Range | 4.75 V to 5.25 V | — |
| Interface Standard | ANSI TIA/EIA-422-B and ITU Recommendation V.11 | — |
| Input Compatibility | TTL-compatible buffered input | — |
| Output State | 3-state, high-impedance output | — |
| Transition Time | Fast transition time | Fast transition times; exact value not provided |
| Input Type | High-impedance input | Differential |
| Protection | Power-up and power-down protection | — |
| 工作溫度 | 0 C to 70 C | — |
| 封裝 | 16-pin SOIC, 0.154 inch body width, 3.90 mm | 16-pin SOIC |
| 安裝類型 | Surface mount | Surface mount |
| Protocol | RS-422 | — |
| Driver Configuration | 4/0 | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| Number of Channels | — | 4 independent differential receivers |
| 輸出類型 | — | TTL-compatible 3-state outputs |
| Standards Supported | — | ANSI TIA/EIA-422-B and TIA/EIA-423-B; ITU V.10 and V.11 |
| Output Enable Function | — | 3-state high-impedance output control |
| 工作溫度範圍 | — | 0°C to 70°C |
| Compatible Driver | — | MC3487 quadruple differential line driver |
| Logic Compatibility | — | TTL-compatible outputs |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection] |
| Input Differential Voltage Range | — | [DATA_NEEDED: input differential voltage range] |
| Output High-Level Voltage | — | [DATA_NEEDED: output high-level voltage] |
| Output Low-Level Voltage | — | [DATA_NEEDED: output low-level voltage] |
| Enable Pin Count | — | [DATA_NEEDED: enable pin count] |
| Lead-Free Status | — | unknown |