MPX5100DP vs MPXV5100GC7U 比較

詳細並排比較 MPX5100DP 由 NXP Semiconductors 與 MPXV5100GC7U 由 STMicroelectronics. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

NXP Semiconductors
MPX5100DP MPX5100DP - 0-100kPa Differential Pressure Sensor 5V 6-SIP | NXP

MPX5100DP - 0-100kPa Differential Pressure Sensor 5V 6-SIP | NXP

MPX5100DP ✓ 啟用中
STMicroelectronics
MPXV5100GC7U MPXV5100GC7U - 100kPa Gauge Pressure Sensor, 5V | STMicroelectronics

MPXV5100GC7U - 100kPa Gauge Pressure Sensor, 5V | STMicroelectronics

MPXV5100GC7U ✓ 啟用中

規格比較

參數 MPX5100DP MPXV5100GC7U
品牌 NXP Semiconductors STMicroelectronics
類別 Pressure Sensors Pressure Sensors
生命週期狀態 啟用中 啟用中
Pressure Type Differential Vented Gauge
Operating Pressure Range 0 kPa to 100 kPa (0 to 14.5 PSI) 0 to 100 kPa (0 to 14.5 PSI)
Maximum Overload Pressure [DATA_NEEDED: maximum overload pressure] 400 kPa
Supply Voltage (Vcc) 5 V (nominal) —
輸出電壓範圍 0.2 V to 4.7 V (ratiometric, ~4.5 V span) 0.2 V to 4.7 V
輸出類型 Analog, ratiometric to Vcc Analog ratiometric, single-ended
Accuracy ±2.5% (0 to 85 °C) 1.5 % over 0 °C to 85 °C
Sensitivity 45 mV/kPa nominal 45 mV/kPa
工作溫度 -40 °C to +125 °C -40 °C to +125 °C
Response Bandwidth 1 kHz (typical) —
Port Configuration Dual ports, male 0.19" (4.93 mm) tube, same side —
封裝 6-SIP Module (through-hole) 8-DIP (0.550" / 13.97 mm), Top Port
Signal Conditioning On-chip amplifier, temperature compensation, calibration —
Technology Piezoresistive MEMS with bipolar ASIC —
安裝類型 Through-Hole (SIP) Through-hole (DIP)
RoHS 狀態 [DATA_NEEDED: RoHS compliance status] Compliant
Lead-Free [DATA_NEEDED: lead-free status] —
供應電壓 — 4.75 V to 5.25 V (typical 5 V)
Response Time — 1.0 ms
供應電流 — [DATA_NEEDED: full-load supply current]
Storage Temperature — [DATA_NEEDED: storage temperature range]
Port Type — Male 0.13" (3.17 mm) tube, vertical

資料表與資源

瀏覽所有產品 建立 BOM 索取報價