MPXV10GC7U vs MPXV5004GC7U 比較

詳細並排比較 MPXV10GC7U 由 NXP Semiconductors 與 MPXV5004GC7U 由 NXP Semiconductors. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

NXP Semiconductors
MPXV10GC7U MPXV10GC7U - 10 kPa Vented Gauge Pressure Sensor | NXP

MPXV10GC7U - 10 kPa Vented Gauge Pressure Sensor | NXP

MPXV10GC7U ✓ 啟用中
NXP Semiconductors
MPXV5004GC7U MPXV5004GC7U - 0-3.92 kPa Vented Gauge Pressure Sensor | NXP

MPXV5004GC7U - 0-3.92 kPa Vented Gauge Pressure Sensor | NXP

MPXV5004GC7U ✓ 啟用中

規格比較

參數 MPXV10GC7U MPXV5004GC7U
品牌 NXP Semiconductors NXP Semiconductors
類別 Pressure Sensors Pressure Sensors
生命週期狀態 啟用中 啟用中
Pressure Type Vented Gauge Vented Gauge
Operating Pressure Range 0 kPa to 10 kPa (0 PSI to 1.45 PSI) 0 kPa to 3.92 kPa (0 to 0.57 PSI)
Maximum Overpressure [DATA_NEEDED: maximum overpressure rating] 16 kPa
輸出類型 Analog Wheatstone Bridge (uncompensated mV) Analog, ratiometric voltage
Full-Scale Output 0 mV to 35 mV at 3 V supply —
Sensitivity 3.5 mV/kPa nominal 1 V/kPa (typical)
供應電壓 3 V to 6 V (3 V typical excitation) 4.75 V to 5.25 V (5 V typical)
供應電流 [DATA_NEEDED: supply current] —
Input Impedance [DATA_NEEDED: bridge input impedance] —
Output Impedance [DATA_NEEDED: bridge output impedance] —
工作溫度 [DATA_NEEDED: operating temperature range] 0 C to +85 C
Port Style Top port, 0.13" (3.18 mm) tube inlet —
封裝 8-DIP (0.550", 13.97 mm) through-hole 8-pin DIP, 0.550 inch (13.97 mm), through-hole
安裝類型 Through-Hole Through-hole
Media Compatibility Dry non-corrosive gases (reference port vented to ambient) Dry non-corrosive gases
Compensation None on chip - external calibration required —
RoHS 狀態 [DATA_NEEDED: RoHS compliance] [DATA_NEEDED: rohs_status]
輸出電壓範圍 — 1 V to 4.9 V
Accuracy — +/- 1.5 percent VFSS
Storage Temperature — -30 C to +100 C
Port Type — Top port tube, 0.13 inch (3.17 mm) diameter

資料表與資源

瀏覽所有產品 建立 BOM 索取報價