MPXV5004GC7U vs MPVZ5010G7U 比較

詳細並排比較 MPXV5004GC7U 由 NXP Semiconductors 與 MPVZ5010G7U 由 NXP Semiconductors. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

NXP Semiconductors
MPXV5004GC7U MPXV5004GC7U - 0-3.92 kPa Vented Gauge Pressure Sensor | NXP

MPXV5004GC7U - 0-3.92 kPa Vented Gauge Pressure Sensor | NXP

MPXV5004GC7U ✓ 啟用中
NXP Semiconductors
MPVZ5010G7U MPVZ5010G7U - 10 kPa Vented Gauge Pressure Sensor, 8-DIP | NXP

MPVZ5010G7U - 10 kPa Vented Gauge Pressure Sensor, 8-DIP | NXP

MPVZ5010G7U ✓ 啟用中

規格比較

參數 MPXV5004GC7U MPVZ5010G7U
品牌 NXP Semiconductors NXP Semiconductors
類別 Pressure Sensors Pressure Sensors
生命週期狀態 啟用中 啟用中
Pressure Type Vented Gauge Vented Gauge
Operating Pressure Range 0 kPa to 3.92 kPa (0 to 0.57 PSI) 0 kPa to 10 kPa (0 to 1.45 PSI)
Maximum Overpressure 16 kPa —
供應電壓 4.75 V to 5.25 V (5 V typical) —
輸出電壓範圍 1 V to 4.9 V —
Sensitivity 1 V/kPa (typical) —
Accuracy +/- 1.5 percent VFSS ±1.5 %FS (0 °C to 85 °C)
工作溫度 0 C to +85 C —
Storage Temperature -30 C to +100 C —
Port Type Top port tube, 0.13 inch (3.17 mm) diameter —
輸出類型 Analog, ratiometric voltage Analog, ratiometric to Vcc
封裝 8-pin DIP, 0.550 inch (13.97 mm), through-hole 8-DIP Module (Case 1368-01, through-hole)
Media Compatibility Dry non-corrosive gases —
安裝類型 Through-hole Through-Hole (DIP module with vent tube)
RoHS 狀態 [DATA_NEEDED: rohs_status] [DATA_NEEDED: RoHS status]
Supply Voltage (Vcc) — 4.75 V to 5.25 V (5 V typical)
供應電流 — 10 mA (maximum)
Analog Output Range — 0.2 V to 4.7 V
Response Time — [DATA_NEEDED: response time ms]
工作溫度範圍 — 0 °C to +85 °C
Compensated Temperature Range — -10 °C to +60 °C
Storage Temperature Range — -30 °C to +100 °C [DATA_NEEDED: confirm exact storage spec]
Sensor Technology — Piezoresistive silicon micromachined
Signal Conditioning — On-chip, temperature compensated, calibrated
MSL 等級 — [DATA_NEEDED: MSL rating]
Body Height — 5.46 mm

資料表與資源

瀏覽所有產品 建立 BOM 索取報價