NE5534ADG vs NE5534ADRE4 比較

詳細並排比較 NE5534ADG 由 onsemi 與 NE5534ADRE4 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

Texas Instruments
NE5534ADRE4 NE5534ADRE4 - 10 MHz Low-Noise Op Amp | Texas Instruments

NE5534ADRE4 - 10 MHz Low-Noise Op Amp | Texas Instruments

NE5534ADRE4 ✓ 啟用中

規格比較

參數 NE5534ADG NE5534ADRE4
品牌 onsemi Texas Instruments
類別 Amplifier ICs Amplifier ICs
生命週期狀態 啟用中 啟用中
Product Type Single low-noise operational amplifier —
Number of Amplifiers 1 circuit —
Supply Voltage Range 3 V to 20 V +3 V to +20 V
Gain-Bandwidth Product 10 MHz —
Slew Rate 13 V/us 13 V/ms typical
Amplifier Type General purpose Single general-purpose operational amplifier
封裝 8-SOIC, 0.154 inch (3.90 mm) width 8-SOIC (0.154 inch, 3.90 mm width)
安裝類型 Surface mount Surface mount
Packaging Tube —
Input Offset Voltage [DATA_NEEDED: input offset voltage] —
Input Bias Current [DATA_NEEDED: input bias current] 500 nA typical
Input Voltage Noise Density [DATA_NEEDED: input voltage noise density] —
Open-Loop Gain [DATA_NEEDED: open-loop gain] 100 V/mV typical
Output Current [DATA_NEEDED: output current] —
Common-Mode Input Range [DATA_NEEDED: common-mode input voltage range] —
Output Swing [DATA_NEEDED: output voltage swing] —
工作溫度範圍 [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
RoHS 狀態 [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Unity-Gain Bandwidth — 10 MHz typical
Input Noise Density — 3.5 nV/√Hz typical
DC Voltage Gain — 100 dB typical
Peak-to-Peak Output Swing — 32 V typical at VCC+ = +18 V and RL = 600 Ω
Total Supply Current — 38 mA per channel
Common-Mode Rejection Ratio — 10 dB typical as shown in source snippet
Offset Nulling — Supported
External Compensation — Supported
腳位數 — 8 pins
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification status]

資料表與資源

瀏覽所有產品 建立 BOM 索取報價