PN5331B3HN vs CLRC66303HN 比較

詳細並排比較 PN5331B3HN 由 NXP Semiconductors 與 CLRC66303HN 由 NXP Semiconductors. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

NXP Semiconductors
CLRC66303HN CLRC66303HN - 13.56MHz Multi-Protocol NFC Frontend | NXP

CLRC66303HN - 13.56MHz Multi-Protocol NFC Frontend | NXP

CLRC66303HN ✓ 啟用中

規格比較

參數 PN5331B3HN CLRC66303HN
品牌 NXP Semiconductors NXP Semiconductors
類別 RF Modules RF Transceivers
生命週期狀態 NRND 啟用中
功能 NFC Reader/Transponder Controller —
Frequency 13.56 MHz —
供應電壓 2.5 V to 3.6 V —
Host Interface USB 2.0 Full-Speed —
Supported Standards ISO/IEC 14443A/B, FeliCa, MIFARE, NFC —
Operating Modes 6 (ISO14443A R/W, ISO14443B R/W, FeliCa R/W, MIFARE Card Emulation, FeliCa Card Emulation, NFC Peer-to-Peer) —
RF Output Power Approx. 200 mW into 50 ohm (datasheet figure) —
Modulation Support On-chip load modulation + external LOADMOD pin —
Microcontroller Core 80C51-compatible —
封裝 40-pin VFQFN Exposed Pad 32-VFQFN exposed pad (HVQFN-32)
安裝類型 Surface Mount Surface Mount
工作溫度 -25C to +85C (datasheet) [DATA_NEEDED: exact limits] [DATA_NEEDED: operating temperature range]
MSL 等級 2 (typical for VFQFN-40) [DATA_NEEDED: per datasheet MSL rating] —
RoHS 狀態 Compliant [DATA_NEEDED: RoHS status]
Secure Element Interface NFC-WI / S2C —
Product Type — Multi-protocol NFC frontend / RFID reader IC
Carrier Frequency — 13.56 MHz
Supply Voltage Range — 2.5 V to 5.5 V
Supported Protocols — ISO/IEC 14443A (MIFARE), ISO/IEC 14443B, ISO/IEC 15693, ISO/IEC 18000-3 mode 3, FeliCa
Host Interfaces — SPI, I2C, UART
Application Domains — Access control, gaming, industrial
Operation Mode — Reader / Writer (PCD / VCD)
Antenna Output — Integrated TX driver stages
Receiver — Integrated low-noise RX path, programmable gain
Family — CLRC663 plus
靜態電流 — [DATA_NEEDED: quiescent current]
生命週期狀態 — Active (per NXP product page)

資料表與資源

瀏覽所有產品 建立 BOM 索取報價