SN75174DWR vs SN75174DW 比較
詳細並排比較 SN75174DWR 由 Texas Instruments 與 SN75174DW 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
Texas Instruments
SN75174DWR - 4-Channel RS-422/RS-485 Driver | Texas Instruments (Tape & Reel)
SN75174DWR ✓ 啟用中規格比較
| 參數 | SN75174DWR | SN75174DW |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 類別 | USB Interface ICs | USB Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Device Type | Quadruple differential line driver | Quadruple differential line driver |
| Number of Drivers | 4 | 4 |
| Logic Direction | 4/0 driver | 4/0 driver |
| Output State | 3-state | 3-state |
| Supported Standards | ANSI EIA/TIA-422-B, RS-485, and ITU Recommendation V.11 | ANSI EIA/TIA-422-B, RS-485, and ITU Recommendation V.11 |
| Maximum Data Rate | 4 megabaud | 4 megabaud |
| Supply Voltage Range | 4.75 V to 5.25 V | 4.75 V to 5.25 V |
| Output Common-Mode Range | Wide positive and negative range; exact limits not provided in the verified data | Wide positive and negative range; exact limits not provided in the verified data |
| 拓撲 | Balanced multipoint bus | Balanced multipoint bus |
| 封裝 | 20-pin SOIC | 20-pin SOIC |
| Package Designation | 20-SOIC | 20-SOIC |
| 安裝類型 | Surface mount | Surface mount |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Enable Control | Common driver enable | Common driver enable |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | [DATA_NEEDED: AEC-Q100 qualification] |
| MSL | [DATA_NEEDED: moisture sensitivity level] | [DATA_NEEDED: moisture sensitivity level] |
| Lead Finish | [DATA_NEEDED: lead finish] | [DATA_NEEDED: lead finish] |
| Production Status | SN75174 listed as an active product on TI; SN75174DWR listed as obsolete by TI carrier-option page | SN75174 listed as an active product on TI; SN75174DW listed as obsolete by TI carrier-option page |