SP485ECN-L vs SP485EN-L 比較
詳細並排比較 SP485ECN-L 由 MaxLinear 與 SP485EN-L 由 MaxLinear. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
MaxLinear
SP485ECN-L - 10Mbps Half-Duplex RS-485 Transceiver | MaxLinear (Tape & Reel)
SP485ECN-L ✓ 啟用中規格比較
| 參數 | SP485ECN-L | SP485EN-L |
|---|---|---|
| 品牌 | MaxLinear | MaxLinear |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | RS-422/RS-485 half-duplex line transceiver | Half-duplex differential transceiver |
| Driver Count | 1 driver | — |
| Receiver Count | 1 receiver | — |
| 供應電壓 | 5 V | — |
| Protocol Support | RS-422 and RS-485 | — |
| Duplex Mode | Half-duplex | Half-duplex |
| 資料速率 | 10 Mbps for SP485ECN-L; SP485 family supports up to 5 Mbps | — |
| Technology | BiCMOS | — |
| 封裝 | 8-pin SOIC | 8-pin SOIC |
| Package Width | 0.154 in (3.90 mm) | 3.9 mm |
| 安裝類型 | Surface mount | Surface mount |
| Packaging | Tape and reel | — |
| Human Body Model ESD Tolerance | Over ±15 kV | — |
| IEC 61000-4-2 Air Discharge ESD Tolerance | Over ±15 kV | — |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | -40°C to +85°C |
| 供應電流 | [DATA_NEEDED: typical and maximum supply current] | — |
| Differential Input Voltage | [DATA_NEEDED: receiver input voltage range] | — |
| Output Current | [DATA_NEEDED: driver output current] | — |
| Shutdown Support | Not stated for SP485ECN-L in the verified data | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| Lead-Free Status | Lead-free product marking is stated in the verified search data | — |
| Interface Standards | — | RS-422 and RS-485 |
| Maximum Data Rate | — | 5 Mbps |
| Supply Voltage Range | — | 4.75V to 5.25V |
| Nominal Supply Voltage | — | 5 V |
| Driver and Receiver Count | — | 1 differential driver and 1 differential receiver |
| Receiver Input Type | — | Differential Schmitt-trigger input |
| Process Technology | — | BiCMOS |
| Package Length | — | 4.9 mm |
| Transceiver Count per Package | — | 1 |
| Supply Decoupling Requirement | — | [DATA_NEEDED: recommended decoupling capacitor value and ESR] |
| Driver Output Current | — | [DATA_NEEDED: driver output current] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver input sensitivity] |
| Propagation Delay | — | [DATA_NEEDED: receiver and driver propagation delay] |
| Input Impedance | — | [DATA_NEEDED: receiver input impedance] |
| Shutdown Function | — | [DATA_NEEDED: shutdown or power-save support] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: automotive qualification status] |