SP485EEN-L vs SN65HVD06DR 比較

詳細並排比較 SP485EEN-L 由 MaxLinear 與 SN65HVD06DR 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

MaxLinear
SP485EEN-L SP485EEN-L - 10Mbps Half-Duplex RS-485 IC | MaxLinear

SP485EEN-L - 10Mbps Half-Duplex RS-485 IC | MaxLinear

SP485EEN-L ✓ 啟用中

規格比較

參數 SP485EEN-L SN65HVD06DR
品牌 MaxLinear Texas Instruments
類別 Interface ICs Interface ICs
生命週期狀態 啟用中 啟用中
Product Type Half-duplex RS-422/RS-485 transceiver —
Transmitter and Receiver Count 1 transmitter and 1 receiver —
資料速率 10,000 kbps 10 Mbps
Alternate Family Data Rate Up to 5 Mbps —
工作電源電壓 4.75 V to 5.25 V —
工作溫度範圍 -40 C to +85 C —
封裝 8-pin SOIC 8-pin SOIC (D)
安裝類型 Surface mount Surface Mount
ESD Tolerance, Human Body Model Greater than 15 kV —
ESD Tolerance, Air Discharge Method Greater than 15 kV under IEC1000-4-2 —
Supported Protocols RS-422 and RS-485 —
Duplex Mode Half-duplex —
Power Classification Low-power interface IC —
EMI Characteristics Enhanced low-EMI design —
RoHS Compliance [DATA_NEEDED: RoHS compliance] —
REACH Compliance [DATA_NEEDED: REACH compliance] —
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification] —
功能 — Transceiver
Protocol — RS422, RS485
Number of Drivers/Receivers — 1/1
Duplex — Half
Receiver Hysteresis — [DATA_NEEDED: receiver hysteresis mV]
供應電壓 — 4.5 V to 5.5 V
工作溫度 — -40C to +85C
Minimum Differential Output Voltage — 2.5 V into 54 ohm load
Bus-Pin ESD Protection (HBM) — 16 kV
Unit Load — 1/8 (up to 256 nodes)
Failsafe — Open, short, and idle-bus
Standards Compliance — ANSI TIA/EIA-485-A, ISO 8482E
MSL 等級 — 1 (unlimited)
RoHS 狀態 — Compliant

資料表與資源

瀏覽所有產品 建立 BOM 索取報價