SP485EEN-L vs SP485REN-L 比較

詳細並排比較 SP485EEN-L 由 MaxLinear 與 SP485REN-L 由 MaxLinear. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

MaxLinear
SP485EEN-L SP485EEN-L - 10Mbps Half-Duplex RS-485 IC | MaxLinear

SP485EEN-L - 10Mbps Half-Duplex RS-485 IC | MaxLinear

SP485EEN-L ✓ 啟用中

規格比較

參數 SP485EEN-L SP485REN-L
品牌 MaxLinear MaxLinear
類別 Interface ICs Interface ICs
生命週期狀態 啟用中 啟用中
Product Type Half-duplex RS-422/RS-485 transceiver Half-duplex RS-422/RS-485 transceiver
Transmitter and Receiver Count 1 transmitter and 1 receiver —
資料速率 10,000 kbps —
Alternate Family Data Rate Up to 5 Mbps —
工作電源電壓 4.75 V to 5.25 V —
工作溫度範圍 -40 C to +85 C -40°C to 85°C
封裝 8-pin SOIC 8-pin SOIC, 3.90 mm wide body
安裝類型 Surface mount Surface mount
ESD Tolerance, Human Body Model Greater than 15 kV —
ESD Tolerance, Air Discharge Method Greater than 15 kV under IEC1000-4-2 —
Supported Protocols RS-422 and RS-485 —
Duplex Mode Half-duplex Half-duplex
Power Classification Low-power interface IC —
EMI Characteristics Enhanced low-EMI design —
RoHS Compliance [DATA_NEEDED: RoHS compliance] —
REACH Compliance [DATA_NEEDED: REACH compliance] —
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification] —
Maximum Data Rate — 5 Mbps
Receiver Input Load — 1/10 unit load
Maximum Nodes per Bus — More than 400 transceivers
Supply Voltage Range — 4.75 V to 5.25 V
Quiescent Supply Current — 900 uA
Process Technology — BiCMOS
Receiver Input Impedance — High impedance
Supported Standards — RS-422 and RS-485
Logic Supply Voltage — 4.75 V to 5.25 V
Enhanced ESD Protection — [DATA_NEEDED: enhanced ESD protection level]
RoHS 狀態 — [DATA_NEEDED: RoHS compliance status]
REACH Status — [DATA_NEEDED: REACH compliance status]

資料表與資源

瀏覽所有產品 建立 BOM 索取報價