SP485REN-L vs SP485EEN-L 比較

詳細並排比較 SP485REN-L 由 MaxLinear 與 SP485EEN-L 由 MaxLinear. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

MaxLinear
SP485EEN-L SP485EEN-L - 10Mbps Half-Duplex RS-485 IC | MaxLinear

SP485EEN-L - 10Mbps Half-Duplex RS-485 IC | MaxLinear

SP485EEN-L ✓ 啟用中

規格比較

參數 SP485REN-L SP485EEN-L
品牌 MaxLinear MaxLinear
類別 Interface ICs Interface ICs
生命週期狀態 啟用中 啟用中
Product Type Half-duplex RS-422/RS-485 transceiver Half-duplex RS-422/RS-485 transceiver
Maximum Data Rate 5 Mbps —
Receiver Input Load 1/10 unit load —
Maximum Nodes per Bus More than 400 transceivers —
Supply Voltage Range 4.75 V to 5.25 V —
Quiescent Supply Current 900 uA —
工作溫度範圍 -40°C to 85°C -40 C to +85 C
封裝 8-pin SOIC, 3.90 mm wide body 8-pin SOIC
安裝類型 Surface mount Surface mount
Process Technology BiCMOS —
Receiver Input Impedance High impedance —
Duplex Mode Half-duplex Half-duplex
Supported Standards RS-422 and RS-485 —
Logic Supply Voltage 4.75 V to 5.25 V —
Enhanced ESD Protection [DATA_NEEDED: enhanced ESD protection level] —
RoHS 狀態 [DATA_NEEDED: RoHS compliance status] —
REACH Status [DATA_NEEDED: REACH compliance status] —
Transmitter and Receiver Count — 1 transmitter and 1 receiver
資料速率 — 10,000 kbps
Alternate Family Data Rate — Up to 5 Mbps
工作電源電壓 — 4.75 V to 5.25 V
ESD Tolerance, Human Body Model — Greater than 15 kV
ESD Tolerance, Air Discharge Method — Greater than 15 kV under IEC1000-4-2
Supported Protocols — RS-422 and RS-485
Power Classification — Low-power interface IC
EMI Characteristics — Enhanced low-EMI design
RoHS Compliance — [DATA_NEEDED: RoHS compliance]
REACH Compliance — [DATA_NEEDED: REACH compliance]
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification]

資料表與資源

瀏覽所有產品 建立 BOM 索取報價