SP490EEP-L vs SP490EN-L 比較
詳細並排比較 SP490EEP-L 由 MaxLinear 與 SP490EN-L 由 MaxLinear. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | SP490EEP-L | SP490EN-L |
|---|---|---|
| 品牌 | MaxLinear | MaxLinear |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | Unknown |
| Product Type | Full-duplex differential line transceiver | RS-485/RS-422 differential line transceiver |
| Interface Standards | RS-485 and RS-422 | — |
| Transceiver Count | 1 transmitter and 1 receiver | — |
| Duplex Mode | Full duplex | Full duplex |
| Maximum Data Rate | 10 Mbps | 5 Mbps |
| Receiver Input Sensitivity | ±200 mV | ±200 mV |
| Common-Mode Range | Wide common-mode range; numerical limits not provided | Wide common-mode range; exact limits not specified in provided data |
| Technology | Low-power BiCMOS | — |
| Power Consumption | Low power; numerical value not provided | — |
| 供應電壓 | [DATA_NEEDED: supply voltage] | 5 V |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | -40°C to +85°C |
| 封裝 | 8-pin plastic DIP | 8-pin narrow SOIC |
| 安裝類型 | Through-hole | Surface mount |
| Driver Enable | No separate tri-state driver enable in SP490E configuration | — |
| Receiver Enable | No separate tri-state receiver enable in SP490E configuration | — |
| Bus Nodes | Up to 32 nodes | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS status] | — |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Lead-Free Status | [DATA_NEEDED: lead-free status] | — |
| Halogen-Free Status | [DATA_NEEDED: halogen-free status] | — |
| Automotive Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Number of Drivers | — | 1 driver |
| Number of Receivers | — | 1 receiver |
| Supported Standards | — | RS-485 and RS-422 |
| Driver/Receiver Architecture | — | Low-power BiCMOS |
| Enable Inputs | — | No explicit driver or receiver tri-state enable inputs |
| Bus Communication | — | Differential balanced signaling |
| Manufacturer Datasheet | — | SP490/SP491 data sheet |
| RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH | — | [DATA_NEEDED: REACH status] |