STM32G071G8U6 vs STM32G071GBU6 比較
詳細並排比較 STM32G071G8U6 由 STMicroelectronics 與 STM32G071GBU6 由 STMicroelectronics. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
STMicroelectronics
STM32G071G8U6 - 64MHz Cortex-M0+ MCU, 64KB Flash | STMicroelectronics
STM32G071G8U6 ✓ 啟用中規格比較
| 參數 | STM32G071G8U6 | STM32G071GBU6 |
|---|---|---|
| 品牌 | STMicroelectronics | STMicroelectronics |
| 類別 | Microcontrollers | Microcontrollers |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Core | ARM Cortex-M0+ 32-bit RISC | — |
| 最大時脈頻率 | 64 MHz | — |
| Program Memory (Flash) | 64 KB (64K x 8) | — |
| RAM | 36 KB | — |
| Supply Voltage Range | 2.0 V to 3.6 V | [DATA_NEEDED: supply voltage range] |
| 工作溫度範圍 | -40 C to +85 C | — |
| 封裝 | 28-pin UFQFPN (4x4 mm) | 28-UFQFPN (4 x 4 mm) |
| GPIO Count | Up to 23 | — |
| ADC | 12-bit, up to 19 channels | — |
| DAC | 12-bit, 2 channels | — |
| USB | USB 2.0 FS device + Type-C/PD (UCPD PHY) | — |
| Timers | 16-bit/32-bit, RTC, SysTick | — |
| Communication Interfaces | 4x USART/UART, 2x I2C, 2x SPI/I2S, USB, UCPD | — |
| DMA Channels | 4 (7 streams) | — |
| Low-Power Modes | Sleep, Stop, Standby, Shutdown | — |
| RoHS Compliance | Compliant | Compliant |
| Product Type | — | 32-bit Arm Cortex-M0+ microcontroller |
| Maximum CPU Frequency | — | 64 MHz |
| Flash Memory | — | 128 KB |
| Flash Organization | — | 128K x 8 |
| SRAM | — | 36 KB |
| SRAM with Hardware Parity Check | — | 32 KB |
| Architecture | — | Arm Cortex-M0+ |
| Instruction Width | — | 32-bit |
| Minimum Operating Temperature | — | -40°C |
| Maximum Operating Temperature | — | 85°C, 105°C, or 125°C, depending on ordering variant |
| Product Series | — | STM32G0 mainstream series |
| Flash Protection | — | Protection and securable area supported |
| USB Type-C Power Delivery | — | Supported application capability for the STM32G071x8/xB family |
| REACH Compliance | — | Compliant |
| Moisture Sensitivity Level | — | MSL 3 |
| 安裝類型 | — | [DATA_NEEDED: mounting type] |
| Number of I/O Pins | — | [DATA_NEEDED: number of I/O pins] |
| Peripheral Configuration | — | [DATA_NEEDED: complete peripheral configuration] |