TCA4311ADR vs TCA4311D 比較

詳細並排比較 TCA4311ADR 由 Texas Instruments 與 TCA4311D 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

Texas Instruments
TCA4311ADR TCA4311ADR - 2.7-5.5V I2C/SMBus Buffer | Texas Instruments

TCA4311ADR - 2.7-5.5V I2C/SMBus Buffer | Texas Instruments

TCA4311ADR ✓ 啟用中
Texas Instruments
TCA4311D TCA4311D - 2.7-5.5V Hot-Swappable I2C Buffer | TI

TCA4311D - 2.7-5.5V Hot-Swappable I2C Buffer | TI

TCA4311D ✓ 啟用中

規格比較

參數 TCA4311ADR TCA4311D
品牌 Texas Instruments Texas Instruments
類別 Interface ICs Interface ICs
生命週期狀態 啟用中 啟用中
Product Type Hot-swappable 2-wire bus buffer 2-bit bidirectional I2C/SMBus buffer
Operating Power-Supply Voltage Range 2.7 V to 5.5 V —
Maximum I2C/SMBus Frequency 400 kHz —
Channel Count 1 channel —
Buffered Signal Count 2 bits —
Bidirectional Data Transfer Supported on SDA and SCL —
Hot-Swappable Operation Supported —
Precharge Voltage 1 V on SDA and SCL —
Supported Bus I2C/SMBus —
Logic Voltage 3.3 V or 5 V —
工作溫度範圍 -40 °C to +85 °C [DATA_NEEDED: operating temperature range]
封裝 8-pin SOIC (D) 8-pin SOIC, 0.154 inch wide, 3.90 mm
安裝類型 Surface mount Surface mount
Shipping Form Tape and reel —
RoHS Compliance [DATA_NEEDED: RoHS compliance status] —
REACH Compliance [DATA_NEEDED: REACH compliance status] —
Supply Voltage Range — 2.7 V to 5.5 V
Maximum Bus Frequency — 400 kHz
Number of Buffered Bits — 2 bits
Signal Direction — Bidirectional
Supported Buses — I2C and SMBus
Hot-Swap Support — Yes, hot-swappable
Enable Control — EN pin; low enables shutdown mode
Connection Status Output — Open-drain READY output
Connected Buses When READY Is High — SDAIN to SDAOUT and SCLIN to SCLOUT
I2C Maximum Bus Capacitance — 400 pF
SMBus Capacitance Restriction — None specified by SMBus, subject to rise-time and fall-time limits
供應電流 — [DATA_NEEDED: supply current]
Propagation Delay — [DATA_NEEDED: propagation delay]
靜態電流 — [DATA_NEEDED: quiescent current]
RoHS 狀態 — [DATA_NEEDED: RoHS status]
REACH Status — [DATA_NEEDED: REACH status]

資料表與資源

瀏覽所有產品 建立 BOM 索取報價