TLD1211SJFUMA1 vs TLD2314ELXUMA1 比較
詳細並排比較 TLD1211SJFUMA1 由 Infineon 與 TLD2314ELXUMA1 由 Infineon. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | TLD1211SJFUMA1 | TLD2314ELXUMA1 |
|---|---|---|
| 品牌 | Infineon | Infineon |
| 類別 | LED Drivers | LED Drivers |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | Linear LED Driver IC | Linear LED Constant Current Driver |
| 輸出數量 | 1 | — |
| 拓撲 | Linear Constant-Current | High-Side Linear Current Source |
| 最大輸出電流 | 85 mA | — |
| Supply Voltage Range (Vs) | 5.5 V to 28 V | — |
| Load-Dump Tolerance | 40 V | — |
| Dimming Interface | PWM via EN pin (CMOS/TTL) | — |
| EN High-Level Voltage (V_EN,ON) | 1 V to 5.5 V | — |
| EN Low-Level Voltage (V_EN,OFF) | -0.3 V to 0.3 V | — |
| EN Input Current (I_EN) | 60 to 130 uA (V_EN = 5 V) | — |
| Sense Voltage (Vsense) | Programmed by external resistor | — |
| Drop Voltage (Vs - Vout) | 1.3 V typical (Iout < 15 mA, Vsense = 0 mV, Vs = 8 V) | — |
| 工作溫度範圍 | -40 C to +150 C (junction) | -40 C to +150 C |
| 封裝 | PG-DSO-8-16 (8-pin, exposed pad) | PG-SSOP-14-5 (exposed pad, 14-lead) |
| 安裝類型 | Surface Mount | Surface Mount |
| Automotive Qualification | AEC-Q100 targeted (Automotive Grade) | — |
| RoHS 狀態 | Compliant | Compliant |
| Number of Output Channels | — | 3 |
| Maximum Output Current per Channel | — | 120 mA |
| Supply Voltage Range | — | 5.5 V to 40 V |
| LED Current Setting | — | External sense resistor on SET pin |
| Dimming Method | — | Linear (analog) via SET, PWM via ENABLE |
| Dropout (Headroom) Voltage | — | 0.5 V typical at 100 mA |
| 靜態電流 | — | [DATA_NEEDED: quiescent current] |
| Diagnostic Outputs | — | Open-LED, short-to-GND, over-temperature |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| MSL 等級 | — | MSL3 |
| Family | — | LITIX Basic |