TLE62512GXUMA3 vs TLE6251DXUMA2 比較
詳細並排比較 TLE62512GXUMA3 由 Infineon 與 TLE6251DXUMA2 由 Infineon. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
規格比較
| 參數 | TLE62512GXUMA3 | TLE6251DXUMA2 |
|---|---|---|
| 品牌 | Infineon | Infineon |
| 類別 | LIN Transceivers | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | High-speed CAN transceiver (HS-CAN interface IC) | 1/1 CAN transceiver |
| Data Transmission Rate | 1 MBd (1 Mbit/s) | — |
| Standard Compliance | ISO 11898-5 | — |
| Supply Voltage Range (VCC) | 4.75 V to 5.25 V | — |
| CAN Bus Voltage Range | 5.5 V to 18 V | — |
| VIO Logic Supply Input | Separate VIO input, value [DATA_NEEDED: VIO voltage range] | — |
| 封裝 | PG-DSO-14 (14-pin, 3.90 mm width) | PG-DSO-8-16 |
| 腳位數 | 14 pins | — |
| 安裝類型 | Surface Mount | — |
| Automotive Qualification | AEC-Q100 qualified | AEC-Q100 |
| RoHS 狀態 | RoHS compliant | [DATA_NEEDED: RoHS status] |
| Power-Down Behaviour | Passive behaviour in power down | — |
| Sleep Mode Power Consumption | Very low power consumption in Sleep mode, value [DATA_NEEDED: sleep current] | — |
| Wake-Up Features | Bus wake-up and local wake-up inhibit output | — |
| Termination | Split termination to stabilize the recessive level | 8 terminations |
| Diagnostics | Separate output for failure diagnosis | — |
| EMI Performance | Optimized for low electromagnetic interference | Low EME |
| Sleep / Standby Control | Sleep and standby operating modes | — |
| Shipping Format | Tape & reel | Tape and reel |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| CAN Version | — | ISO 11898-2/-5 |
| Maximum CAN Data Rate | — | 1 Mbps |
| Transmitter Count | — | 1 |
| Receiver Count | — | 1 |
| Operating Modes | — | Normal and standby |
| Supply Voltage Compatibility | — | 3.3 V and 5 V |
| Application Segment | — | Automotive and industrial CAN networks |
| Package Type | — | Surface-mount DSO |
| Wake-Up Capability | — | Supported |
| CAN Bus Interface | — | Differential CAN_H and CAN_L |
| REACH Status | — | [DATA_NEEDED: REACH status] |