TLE62513GXUMA1 vs TLE62513GXUMA2 比較
詳細並排比較 TLE62513GXUMA1 由 Infineon 與 TLE62513GXUMA2 由 Infineon. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
規格比較
| 參數 | TLE62513GXUMA1 | TLE62513GXUMA2 |
|---|---|---|
| 品牌 | Infineon | Infineon |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | High-speed CAN transceiver | 1/1 CANbus transceiver |
| CAN Transceiver Type | Half-duplex | — |
| Number of Transceivers | 1 | 1 transceiver |
| Maximum Data Rate | 1 MBaud | — |
| Transceiver Supply Voltage Range | 5.5 V to 18 V | — |
| VIO Supply Voltage | [DATA_NEEDED: VIO input voltage range] | — |
| Compliance | ISO 11898-5 | — |
| Operating Modes | Normal, Sleep, and Standby | Normal, Sleep, and Standby |
| Wake-Up Features | Bus wake-up and local wake-up | — |
| Wake-Up Inhibit | Separate output for controlling external circuitry | — |
| Failure Diagnosis | Separate output | — |
| Electromagnetic Emission | Optimized for low EME | — |
| Electromagnetic Immunity | Optimized for high immunity | — |
| Power Consumption | Very low power consumption in Sleep mode | — |
| 封裝 | PG-DSO-14 | PG-DSO-14 |
| Package Type | 14-pin DSO, Tape & Reel | 14-SOIC, 3.90 mm width |
| RoHS 狀態 | Compliant | [DATA_NEEDED: RoHS status] |
| Automotive Qualification | AEC-Q100 | AEC-Q100 qualified |
| 工作溫度範圍 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Logic Input Levels | [DATA_NEEDED: TXD and RXD logic thresholds] | — |
| Bus Pin Current | [DATA_NEEDED: CANH and CANL current] | — |
| Nominal Supply Voltage | — | 5 V |
| 安裝類型 | — | Surface mount |
| 腳位數 | — | 14 pins |
| 介面類型 | — | CAN |
| Power-Down Behavior | — | Passive behavior in power-down |
| Family Relationship | — | Successor to TLE6251G |
| Ordering Variant | — | GXUMA2 automotive ordering code |
| CANH/CANL Data Rate | — | [DATA_NEEDED: maximum CAN data rate] |
| Loop Delay | — | [DATA_NEEDED: receiver loop delay] |
| Bus Fault Tolerance | — | [DATA_NEEDED: bus fault voltage tolerance] |
| Standby Current | — | [DATA_NEEDED: standby current] |
| Sleep Current | — | [DATA_NEEDED: sleep current] |
| REACH Status | — | [DATA_NEEDED: REACH status] |