AD532JDZ - 4-Quadrant Multiplier/Divider | Analog Devices
MPN: AD532JDZ ✗ 停產AD532JDZ 概覽
An analog multiplier/divider is an integrated circuit that performs mathematical operations on continuously varying voltages. Unlike digital calculation performed by a microcontroller, this component operates directly with analog signals. The AD532 family belongs to the broader signal-conditioning hierarchy of analog multipliers, analog dividers, function converters, and precision analog ICs. Its four-quadrant behavior supports multiplication and division across positive and negative signal combinations.
The AD532JDZ provides one multiplier/divider, three internal amplifiers, and a 14-CDIP package identified by the TO-116 case style. Internally trimmed construction is intended to reduce the need for external calibration of the multiplier core. These features make the device useful when an analog control path needs proportional calculation, signal scaling, or division without converting the measured quantity into a digital representation.
The AD532JDZ is specified for ±10 V to ±18 V supply operation and a 45 V/µs slew rate. Those operating limits define the usable bandwidth and settling behavior of circuits built around the device. As an analog multiplier/divider, its practical accuracy also depends on input levels, resistor ratios, frequency content, supply stability, component tolerances, and circuit layout. The manufacturer datasheet should remain the controlling reference for gain accuracy, input impedance, bandwidth, and noise limits before a production design is released.
Typical uses include analog multiplier and divider circuits, squaring and square-root functions, algebraic computations, control-loop modulation, servo systems, laboratory instrumentation, and industrial signal-processing equipment. The ceramic DIP construction can also simplify insertion into older through-hole instrument and control hardware. Because Analog Devices marks the AD532 family as not recommended for new designs, it is best treated as a maintenance or redesign component rather than the default choice for a fresh platform.
Designers should verify the 14-lead pin assignment, observe the ±10 V to ±18 V supply limits, and maintain signal levels within the multiplier core's linear operating region. Zero-impedance feedback paths must follow the manufacturer's reference topology because excessive impedance can degrade bandwidth and stability. Input and output compensation networks should be placed close to the device, and unused inputs should be returned to an appropriate defined potential rather than left floating.
This product page combines lifecycle guidance, package information, operating limits, application analysis, and qualified same-family alternatives. It is intended to help engineers identify the AD532JDZ for legacy or maintenance work while planning a controlled transition to a currently recommended multiplier/divider for new designs.
直接替換替代品,適用於 AD532JDZ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
AD532JDZ 最大額定值與電氣特性
| Product Type | 1 integrated analog multiplier/divider |
| Operating Quadrants | 4 quadrants |
| Multiplier/Divider Count | 1 multiplier/divider |
| Internal Amplifier Count | 3 amplifiers |
| Supply Voltage Range | ±10 V to ±18 V |
| Slew Rate | 45 V/µs |
| 工作溫度範圍 | 0°C to +70°C |
| 封裝 | 14-CDIP |
| Case Style | TO-116 |
| Lead Count | 14 leads |
| Trim Method | Internal trim |
AD532JDZ to-116 腳位配置指南
AD532JDZ(to-116 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: AD532JDZ.
請參閱 資料表 以查看完整腳位配置。
典型應用
AD532JDZ 適用於 6 應用s: Analog Multiplication and Division, Control-Loop Modulation, Servo and Instrumentation Amplification, Signal Squaring and Power Calculation, Legacy Test Equipment Repair, Industrial Analog Signal Conditioning.
Analog Multiplication and Division
The AD532JDZ is suitable when a control or measurement circuit must calculate the product or ratio of two continuously varying voltages. Its one internally trimmed multiplier/divider supports four-quadrant operation, while three internal amplifiers support the associated signal-conditioning paths. The specified ±10 V to ±18 V supply range accommodates conventional bipolar analog rails. In a multiplier configuration, input and feedback resistor values determine scale factor, so their tolerances and temperature coefficients directly affect system accuracy and must be reviewed against the manufacturer test conditions.
推薦
Control-Loop Modulation
The AD532JDZ can form the mathematical element of a proportional or analog control loop where a control command must modulate another signal. Its four-quadrant behavior accommodates positive and negative input combinations, and the specified 45 V/µs slew rate establishes the basic dynamic capability of the multiplier core. Practical loop performance also depends on compensation capacitance, feedback impedance, source impedance, and signal bandwidth. Reuse the manufacturer's application topology and verify stability with the actual external components rather than treating the slew rate as a complete settling-time specification.
推薦
Servo and Instrumentation Amplification
The AD532JDZ fits legacy servo and laboratory instrumentation in which an analog multiplier provides gain control, reference scaling, or signal transformation. Internally trimmed construction reduces the need for external adjustment of the multiplier core, while the 0°C to +70°C operating range suits standard commercial laboratory environments. For instrumentation, preserve the specified ±10 V to ±18 V supply range and use low-noise, stable feedback components. Check the complete gain and bandwidth curves before selecting resistor values for precision measurements.
推薦
Signal Squaring and Power Calculation
A multiplier configured for squaring can support proportional power or energy-related calculations when the underlying variables are represented as voltages. The AD532JDZ provides one internally trimmed multiplier/divider and three amplifiers within a 14-lead ceramic DIP package. Because squaring doubles the signal-order sensitivity, component tolerances, offset behavior, and input range can affect the final result more strongly than in a linear amplifier. Use the manufacturer's test conditions and reference circuits to establish valid input levels and compensation values for the intended measurement range.
推薦
Legacy Test Equipment Repair
The AD532JDZ is useful for repairing or extending older analog test instruments that use a 14-CDIP multiplier/divider and bipolar supply rails. Its internally trimmed four-quadrant core supports multiplication, division, squaring, and square-root functions commonly used in analog measurement systems. The 0°C to +70°C rating suits controlled commercial environments, but extended temperature coverage is not implied. Before installation, compare the complete legacy schematic, pin assignment, supply arrangement, and calibration procedure with the manufacturer documentation, then validate accuracy at several input levels.
推薦
Industrial Analog Signal Conditioning
The AD532JDZ can be incorporated into legacy industrial signal-conditioning systems that require proportional scaling before further processing. Its one four-quadrant multiplier/divider handles bipolar signal relationships, and the ±10 V to ±18 V supply specification aligns with conventional bipolar analog rails. The device must remain within its signal and frequency limits, and feedback networks require low impedance to preserve intended dynamics. Because the part is not recommended for new designs, use it for continuity of an existing platform and establish a migration plan for future expansions.
推薦
推薦產品摘要
工程參考資料,適用於 AD532JDZ — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | AD632AD | AD632BD |
|---|---|---|---|
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Package | 14-CDIP | 14-CDIP | 14-CDIP |
| Product Function | Four-quadrant analog multiplier/divider | Pin-compatible AD632 multiplier/divider | AD632 multiplier/divider |
| Multiplier/Divider Count | 1 | 1 | 1 |
| Supply Voltage Range | ±10 V to ±18 V | Not stated | Not stated |
| Slew Rate | 45 V/µs | Not stated | Not stated |
| Operating Temperature Range | 0°C to +70°C | Not stated | Not stated |
| Lifecycle Position | Not recommended for new designs | AD632 upgrade family | AD632 upgrade family |
| Internal Trim | Yes | Not stated | Not stated |
主要差異化特點
- Original internally trimmed AD532 implementation (對比AD632AD)
- Established AD632 upgrade path (對比AD632BD)
- Legacy thermal and supply characterization (對比AD632AD)
設計說明
Use the 14-lead ceramic DIP pin-description table in the manufacturer datasheet when assigning PCB connections. Place the device in a conventional 14-lead DIP footprint and confirm body width, lead spacing, and keepout against the mechanical drawing. Because the pinout cannot be reproduced safely without the exact schematic, validate every connection against the datasheet before fabrication and do not infer pin functions from similarly packaged amplifier ICs.
Provide supply rails within the specified ±10 V to ±18 V range and include adequate bypassing close to the power pins. Use a symmetrical bipolar supply arrangement when the application requires bipolar inputs and outputs. Check the complete power dissipation and output-current limits under the worst-case signal condition. For a ±15 V supply, the rail-to-rail voltage is 30 V, so even a modest load current can make the TO-116 thermal limit relevant during sustained operation.
Follow the manufacturer's feedback and compensation topology rather than substituting arbitrary resistor or capacitor values. The specified 45 V/µs slew rate describes slewing behavior, not complete settling time, and the usable precision bandwidth depends on gain, input signal level, and feedback impedance. Keep input and feedback traces short, maintain symmetrical routing where possible, and test settling and linearity with the intended source and load impedances.
Do not treat a pin-for-pin AD632-family comparison as proof that every electrical characteristic is identical. Confirm supply range, common-mode range, gain accuracy, bandwidth, slew behavior, current consumption, and stability-network values before substituting AD632AD or AD632BD. Because AD532 is not recommended for new designs, preserve its use for maintenance while requiring a schematic review and requalification for any drop-in upgrade.
合規資訊
The commercial-temperature multiplier/divider is not presented as an automotive-qualified AEC-Q100 device. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the manufacturer or lot documentation.