Analog Devices

AD725ARZ-R7 - RGB to NTSC/PAL Video Encoder | Analog Devices

MPN: AD725ARZ-R7 ✓ 啟用中
16-SOIC (0.295 in, 7.50 mm width) Package Yes Memory
MOQ: 1 |

AD725ARZ-R7 概覽

The Analog Devices AD725ARZ-R7 is a very low cost general purpose RGB to NTSC/PAL video encoder IC housed in a 16-pin SOIC (0.295 in / 7.50 mm width) surface-mount package, supplied in tape-and-reel packaging (the -R7 suffix). It converts red, green, and blue color component signals into their corresponding luminance (baseband amplitude) and chrominance (subcarrier amplitude and phase) signals in accordance with either NTSC or PAL standards.

A video encoder is an interface IC that sits at the boundary between a digital or analog graphics source and a standard-definition composite video display. In the signal-chain hierarchy, it belongs to the video encoder -> video interface -> mixed-signal IC category, translating RGB component video into the composite waveforms that analog TVs, monitors, and recording equipment expect.

Key features include simultaneous composite video output and separate chrominance and luminance (S-Video) outputs, a luma trap port that eliminates cross-color artifacts, TTL-compatible logic levels for direct interfacing with standard digital circuitry, and an integrated chroma delay line. These functions normally require several external components in discrete implementations; the AD725 integrates them on chip, which is the basis of its very low system cost.

Technically, the AD725 performs analog matrixing of the RGB inputs into the Y (luminance) and quadrature-modulated C (chrominance) components, with a subcarrier locked to an external color burst crystal reference. The luma trap port allows the designer to notch the chroma subcarrier from the luma path, preventing cross-color artifacts on high-saturation images. NTSC or PAL operation is selected by pin strapping, and the integrated delay ensures the luma and chroma signals re-align at the output, preserving horizontal picture resolution.

Typical applications include embedded graphics systems that must drive legacy composite monitors, industrial HMI and test-equipment video outputs, set-top and retro-computing video interfaces, and automotive or kiosk displays that accept only NTSC/PAL composite or S-Video input.

A key design consideration is crystal accuracy: the NTSC (3.579545 MHz) or PAL (4.433619 MHz) subcarrier crystal must be within specification to keep color hue and saturation stable, and analog ground and power routing should keep RGB input noise below the encoder's signal swing to preserve picture quality.

This page synthesizes distributor availability data, verified datasheet features, drop-in alternatives, and practical design guidance not consolidated in the manufacturer datasheet alone.

直接替換替代品,適用於 AD725ARZ-R7 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: AD725ARZ-R7 (相同外形與佔位) — 差異在於 Luma Trap Port, Package, Packaging.

Analog Devices
Package: 16-pin SOIC (SO-16, R suffix on Analog Devices R-suffix tape-and-reel grade)
比較對象 AD725ARZ-R7 →
Analog Devices
Luma Trap Port: Yes (YTRAP, reduces cross-color artifacts)
Package: 16-SOIC (0.295 in, 7.50 mm width)
Packaging: Tape & Reel (-RL suffix)
比較對象 AD725ARZ-R7 →

AD725ARZ

✅ 直接替換
Analog Devices
📦 16-SOIC (7.50 mm)
RGB to NTSC/PAL video encoder · NTSC-M, PAL-B/D/G/H/I/M/N · Analog RGB (0 V to 0.7 V) or TTL digital RGB · Composite video (NTSC/PAL), Y/C (S-Video), luma trap port · +5 V single supply · 28.63636 MHz (NTSC) / 26.84325 MHz (PAL)

聯絡詢價

查看資料表 →

AD725ARZ-RL

✅ 直接替換
Analog Devices
📦 16-SOIC (7.50 mm)
RGB to NTSC/PAL Video Encoder · NTSC and PAL · Composite Video; Chrominance and Luminance (S-Video) · Yes (YTRAP, reduces cross-color artifacts) · TTL compatible (supports 3 V CMOS systems) · Yes · < 1 uA · 16-SOIC (0.295 in, 7.50 mm width)

聯絡詢價

查看資料表 →

AD725ARZ-R7 最大額定值與電氣特性

功能 RGB to NTSC/PAL Video Encoder
Composite Video Output Yes (NTSC and PAL)
S-Video Output Yes (separate chrominance and luminance)
Luma Trap Port Yes (eliminates cross-color artifacts)
Logic Interface TTL logic levels
Integrated Chroma Delay Yes
安裝類型 Surface Mount
封裝 / 外殼 16-SOIC (0.295 in, 7.50 mm width)
Input Video Format RGB color component signals
Output Video Standard NTSC or PAL (selectable)
RoHS 狀態 Compliant
REACH Status Compliant
Packaging Tape & Reel (-R7 reel suffix)

AD725ARZ-R7 16-soic (0.295 in, 7.50 mm width) 腳位配置指南

AD725ARZ-R7(16-soic (0.295 in, 7.50 mm width) 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

AD725ARZ-R7 的 16-soic (0.295 in, 7.50 mm width) 封裝腳位圖

無詳細腳位定義資料: AD725ARZ-R7.

請參閱 資料表 以查看完整腳位配置。

典型應用

AD725ARZ-R7 適用於 6 應用s: Embedded Graphics to Composite Display, Industrial HMI and Test Equipment Video Output, Set-Top Box and Video Playback Interfaces, Retro Computing and Legacy System Restoration, Automotive and Kiosk Composite Displays, Security Camera and Surveillance Video Output.

📺

Embedded Graphics to Composite Display

The AD725ARZ-R7 fits embedded systems whose graphics controller outputs RGB but whose display only accepts NTSC or PAL composite video. Its TTL logic levels connect directly to standard digital video circuitry without level shifting, and the integrated chroma delay keeps luma and chroma aligned so text remains legible. Because it produces both composite and S-Video outputs from the same RGB source, one encoder can serve two display types simultaneously. The luma trap port suppresses cross-color artifacts on fine graphics, which is critical for HMI screens and instrument readouts rendered over composite links.

🏭

Industrial HMI and Test Equipment Video Output

Industrial human-machine interfaces and bench instruments often must drive legacy composite monitors or recorders that only accept NTSC/PAL signals. The AD725ARZ-R7 is a very low cost solution that converts the instrument's RGB graphics into standards-compliant composite video, so no external modulator or scan converter is required. Its selectable NTSC/PAL operation allows one board design to ship worldwide. The luma trap port eliminates cross-color artifacts on dense numeric displays, and the SOIC-16 surface-mount package suits automated production of industrial control boards with long-term sourcing stability.

🔧

Set-Top Box and Video Playback Interfaces

Set-top boxes, media players, and video playback devices targeting markets where composite and S-Video connections remain common use the AD725ARZ-R7 as the analog video output stage. It accepts the RGB component signals from the system's graphics or video pipeline and generates both composite and separated Y/C (S-Video) outputs per NTSC or PAL standards. The integrated chroma delay ensures correct Y/C timing without external delay lines, reducing component count. Its low cost supports high-volume consumer builds, while the luma trap port keeps static menus and EPG graphics free of color artifacts.

🖥️

Retro Computing and Legacy System Restoration

Restoration and reproduction designs for legacy computers and game consoles need a reliable RGB-to-composite encoder to drive period-correct NTSC/PAL monitors and televisions. The AD725ARZ-R7 performs exactly this function: RGB color components in, standards-compliant luminance and chrominance out, with the integrated delay line and luma trap preserving the sharp edges of pixel graphics. Its TTL input levels match classic 5 V digital logic, and its RoHS-compliant SOIC-16 package allows new lead-free boards. Selecting the correct subcarrier crystal reproduces authentic NTSC or PAL color rendering.

🚗

Automotive and Kiosk Composite Displays

Automotive rear-seat entertainment units, fuel-pump kiosks, and vending displays frequently use composite-only screens. The AD725ARZ-R7 converts the controlling system's RGB graphics to NTSC or PAL composite video with correct subcarrier phase, and its selectable standard supports deployments across regions. The luma trap port is particularly useful here, since text-heavy pricing and menu screens otherwise exhibit cross-color rainbow artifacts. Its very low unit cost suits high-volume kiosk economics, and the 16-SOIC footprint integrates into compact display driver boards without layout changes.

🎥

Security Camera and Surveillance Video Output

Surveillance systems that overlay graphics (camera ID, timestamps, OSD menus) onto video often hold an RGB overlay layer that must be combined with and output as standard composite video. The AD725ARZ-R7 encodes such RGB overlay or full-frame RGB signals into NTSC/PAL composite compatible with CCTV recorders and monitors. Both composite and S-Video outputs allow connectivity to a range of legacy field equipment. The luma trap port keeps overlaid text crisp by suppressing cross-color artifacts, and TTL inputs simplify interfacing with the OSD generation logic running at 5 V levels.

推薦產品摘要

ADV7123 Triple RGB video DAC feeding RGB inputs 用於: Embedded Graphics to Composite Display, Automotive and Kiosk Composite Displays AD8061 Video op-amp output buffer 用於: Embedded Graphics to Composite Display, Automotive and Kiosk Composite Displays, Security Camera and Surveillance Video Output ADV7120 RGB video DAC for graphics pipeline 用於: Industrial HMI and Test Equipment Video Output AD811 High-speed video buffer amplifier 用於: Industrial HMI and Test Equipment Video Output ADV7171 Digital video encoder companion 用於: Set-Top Box and Video Playback Interfaces AD8065 Precision output amplifier 用於: Set-Top Box and Video Playback Interfaces AD8056 RGB input conditioning amplifier 用於: Retro Computing and Legacy System Restoration ADG774 Video signal source multiplexer 用於: Retro Computing and Legacy System Restoration AD818 Video multiplexer amplifier 用於: Security Camera and Surveillance Video Output
What is the AD725ARZ-R7 and what does it do?
The AD725ARZ-R7 is a very low cost general purpose RGB to NTSC/PAL video encoder from Analog Devices. According to the manufacturer datasheet, it converts red, green, and blue color component signals into their corresponding luminance and chrominance signals in accordance with either NTSC or PAL standards. It provides composite video output, separate S-Video (Y/C) outputs, a luma trap port, TTL logic levels, and an integrated chroma delay, all in a 16-pin SOIC surface-mount package.
What package does the AD725ARZ-R7 come in?
The AD725ARZ-R7 is supplied in a 16-SOIC package with 0.295 inch (7.50 mm) body width for surface-mount assembly. The -R7 suffix indicates tape-and-reel packaging for automated pick-and-place production. DigiKey lists the product explicitly as a Video Encoder IC, RGB to NTSC/PAL, 16-SOIC. Because it is a standard JEDEC-style SOIC-16 body, standard reflow profiles and footprints for 7.50 mm SOIC-16 devices apply.
Does the AD725 support both NTSC and PAL output?
Yes, the AD725 encodes RGB inputs into either NTSC or PAL composite video, selectable per design. According to the datasheet, it generates the luminance (baseband amplitude) and chrominance (subcarrier amplitude and phase) signals in accordance with either NTSC or PAL standards. The subcarrier frequency is set by an external crystal, typically 3.579545 MHz for NTSC and 4.433619 MHz for PAL, so the correct crystal must be fitted for the intended standard.
What are the differences between AD725ARZ-R7 and AD725ARZ?
The AD725ARZ-R7 and AD725ARZ are the same die in the same 16-SOIC package; they differ only in packaging format. The -R7 suffix denotes a 7-inch tape-and-reel for volume assembly, while the plain AD725ARZ is supplied in tube/tray format. Electrically they are identical and pin-to-pin drop-in interchangeable on the same PCB footprint, so the choice depends purely on your production pick-and-place method, not on circuit performance.
What is the luma trap port on the AD725 used for?
The luma trap port eliminates cross-color artifacts in the encoded picture. According to the AD725 datasheet, the luma trap port allows an external trap (notch) circuit to remove the chrominance subcarrier content from the luminance path. Without it, high-frequency luma detail can be misinterpreted as color, causing rainbow-like artifacts on fine striped patterns such as text or checkered graphics. It is especially valuable in graphics-heavy embedded displays where sharp edges are common.
What is the price of AD725ARZ-R7?
The AD725ARZ-R7 is a low-cost video encoder, and exact unit pricing varies by quantity and distributor - current quotes are available from DigiKey, Mouser, and via Octopart, which compares bulk discounts across 3 distributors as of 2026-10-20. XAIPART lists quantity-break pricing on request; because pricing changes frequently, we recommend requesting a live quote for 1, 10, 100, 500, and 1000-piece breaks rather than relying on a static published price.
Where to buy AD725ARZ-R7 online?
The AD725ARZ-R7 can be purchased online from authorized distributors including DigiKey Electronics (which lists stock shipping today), Mouser Electronics, and through price-comparison on Octopart, which aggregates 3 distributor sources as of 2026-10-20. XAIPART also supplies this part with quantity-break pricing and technical support; submit a request for a formal quotation including lead time for production volumes or reel quantities.
Is AD725ARZ-R7 in stock and what is the lead time?
DigiKey's listing states 'Buy now, ships today' for the AD725ARZ-R7, indicating distributor stock was available at the time of our last verification on 2026-10-20. Octopart reports availability from 3 distributors. For guaranteed production quantities, reel-level stock can tighten because this is a legacy-standard-definition part; we recommend confirming live stock and lead time at XAIPART or your preferred distributor before committing to a production build.
What is the best drop-in replacement for AD725ARZ-R7?
The best drop-in replacements are other AD725 packaging variants: the AD725ARZ (tube/tray packaging) and the AD725ARZ-RL (larger reel format), both listed by Abacus Technologies as Form-Fit-Function alternates of the AD725ARZ-R7. All use the identical die in the same 16-SOIC package, so they are pin-to-pin compatible on the same footprint. No verified cross-brand pin-compatible replacement appears in current cross-reference data; alternative video encoders from other manufacturers require footprint and circuit verification.
Can a different-brand encoder replace the AD725ARZ-R7?
No cross-brand pin-to-pin equivalent for the AD725ARZ-R7 was confirmed in the alternatives cross-reference data as of 2026-10-20. Other manufacturers' RGB-to-composite encoders may be functionally similar but differ in pinout, package, supply requirements, and external component values, so they are not drop-in replacements. If your design must move away from the AD725, plan for PCB re-layout and full parametric verification of the candidate encoder, including NTSC/PAL selection, subcarrier clocking, and output levels.
Where can I download the AD725ARZ-R7 datasheet PDF?
The AD725ARZ-R7 datasheet is available from the Analog Devices product page at analog.com/en/products/ad725.html, which hosts the official PDF covering both the AD725ARZ and AD725ARZ-R7 packaging variants. Datasheet archives such as Alldatasheet also mirror the 20-page AD725ARZ document, but always prefer the Analog Devices site for the latest revision. The PDF includes electrical specifications, application circuits, and the luma trap design details.
Where can I find the AD725ARZ-R7 pinout?
The AD725 pinout is documented in the manufacturer datasheet available on the Analog Devices AD725 product page at analog.com/en/products/ad725.html. The device is packaged in a 16-SOIC, and the datasheet includes the pin configuration diagram plus pin function descriptions for the RGB inputs, video outputs, subcarrier crystal pins, and NTSC/PAL control pins. Always confirm pin assignments against the latest datasheet revision before layout, and note distributor engineering desks (e.g., Veswin) can supply pinout support on request.
What are the key specifications of the AD725ARZ-R7 that engineers should know?
The AD725ARZ-R7 is a low-cost RGB to NTSC/PAL video encoder in a 16-SOIC (7.50 mm) package. Key facts from the datasheet: composite video output for both NTSC and PAL, separate chrominance and luminance (S-Video) outputs, a luma trap port to eliminate cross-color artifacts, TTL logic levels, and an integrated chroma delay. It converts RGB component signals into luminance and quadrature-modulated chrominance per the selected broadcast standard, requiring an external subcarrier crystal.
AD725 vs AD724 - which should I choose?
The AD725 is the recommended current choice for RGB to NTSC/PAL encoding; the AD724 is an earlier related device, and Analog Devices' own product forum discusses seeking an AD724 alternative with industrial-grade operating temperature, indicating availability or temperature-range pressure on the AD724. The AD725 adds the luma trap port for cross-color artifact suppression and offers both composite and S-Video outputs at very low cost. Verify the temperature grade you need on the AD725ARZ-R7 datasheet before finalizing an industrial design.
What design precautions should I take when using the AD725ARZ-R7?
Fit the correct subcarrier crystal for your target standard (3.579545 MHz NTSC, 4.433619 MHz PAL) and keep crystal loading within datasheet limits, since hue and saturation stability depend on subcarrier accuracy. Use the luma trap port in graphics-heavy applications to suppress cross-color artifacts. Keep analog supply and ground routing quiet relative to the RGB inputs, terminate the composite and S-Video outputs with the standard 75-ohm video impedance, and follow the datasheet application circuit for coupling and clamp components.

工程參考資料,適用於 AD725ARZ-R7 — 比較、設計指引及合規資訊。

選型指南

Choose the AD725ARZ-R7 when you need a low-cost, RoHS-compliant RGB to NTSC/PAL encoder in reel packaging for automated surface-mount production, especially where both composite and S-Video outputs and cross-color suppression (luma trap) matter - typical for embedded graphics, kiosk, surveillance, and legacy-display designs. Select the identical AD725ARZ in tube/tray format for prototypes, hand assembly, or small pilot runs. Choose AD725ARZ-RL for very high-volume lines where large-reel handling reduces changeovers. No cross-brand pin-compatible drop-in replacement was verified in current cross-reference data as of 2026-10-20, so moving to another manufacturer's encoder requires PCB re-layout and full parametric verification. Within the ADI family, confirm the operating temperature grade fits your industrial environment before release.

與替代品比較

參數 本產品 AD725ARZ AD725ARZ-RL
Package 16-SOIC (7.50 mm), Tape & Reel 16-SOIC (7.50 mm), Tube/Tray - same 16-SOIC (7.50 mm), Large Reel - same
Brand Analog Devices Analog Devices Analog Devices
Video Standard NTSC and PAL (selectable) NTSC and PAL (selectable) NTSC and PAL (selectable)
Composite + S-Video Outputs Yes (both) Yes (both) Yes (both)
Luma Trap Port Yes Yes Yes
Logic Levels TTL TTL TTL
Pin Compatibility Reference (16-SOIC AD725 pinout) Pin-to-pin identical Pin-to-pin identical
Packaging Format Tape & Reel (-R7) Tube / Tray Reel (RL)
RoHS Compliance Compliant (Z suffix) Compliant (Z suffix) Compliant (Z suffix)

主要差異化特點

  • Identical silicon, flexible packaging (對比AD725ARZ)
  • Reel format for production sourcing (對比AD725ARZ-RL)
  • Integrated luma trap port (對比Generic low-cost encoders)

設計說明

Subcarrier crystal selection is the most common source of color problems with the AD725. Use a 3.579545 MHz crystal for NTSC and a 4.433619 MHz crystal for PAL, and follow the datasheet loading-capacitor recommendation exactly; even small frequency error shifts hue across the picture. Confirm which standard your target display region uses before finalizing the BOM, and remember the NTSC/PAL selection pin must be strapped correctly - a floating control pin produces an unusable output standard mismatch.

Use the luma trap port in graphics-heavy applications. The trap notch removes the chroma subcarrier from the luminance path and prevents cross-color rainbow artifacts on fine text, checkered patterns, and striped graphics - the typical content of embedded HMI and OSD screens. Implement the trap per the datasheet application circuit with correct component values for the selected subcarrier frequency; an incorrectly tuned trap instead softens horizontal picture detail, reducing legibility of small text.

Keep the RGB analog input traces short and away from the subcarrier crystal and digital clock lines to prevent chroma modulation artifacts. Terminate the composite and S-Video outputs with the standard 75-ohm video impedance (series resistor plus load) to guarantee correct output amplitude and minimize reflections on long cables. Provide a clean analog supply with local decoupling, and route the analog ground as a quiet reference under the encoder - sharing ground returns with digital switching currents raises output noise and creates visible picture hum bars.

合規資訊

RoHS
Compliant
REACH
Compliant
AEC-Q100
Not Applicable
無鉛
Yes
無鹵
Unknown
衝突礦產
Compliant

Per Abacus Technologies compliance listing for AD725ARZ family: EU RoHS Compliant, REACH Compliant, DRC Conflict Free. The Z suffix in the part number denotes lead-free/RoHS-compliant construction.

資料驗證日期: 2026-10-20 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

AD725ARZ-R7 AD725ARZ-R7 datasheet Analog Devices AD725 RGB to NTSC PAL encoder RGB to composite video encoder IC SOIC-16 AD725ARZ-R7 price and stock AD725ARZ-R7 vs AD725ARZ difference AD725ARZ-R7 drop-in replacement equivalent AD725 luma trap port cross color artifacts video encoder for embedded graphics composite monitor where to buy AD725ARZ-R7 online AD725 pinout SOIC-16 NTSC PAL video encoder low cost IC

相關元件與詞彙

Analog Devices AD725ARZ-R7 AD725ARZ AD725ARZ-RL AD724 video encoder RGB to NTSC/PAL encoder composite video S-Video luminance chrominance luma trap port TTL logic levels 16-SOIC SOIC package family surface mount RoHS REACH Tape & Reel embedded graphics surveillance video industrial HMI
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情