Analog Devices

AD741CN - Precision Monolithic Op Amp | Analog Devices

MPN: AD741CN ✓ 啟用中
10 V Vdss 50 nA maximum Id 8-pin PDIP Package
MOQ: 1 |

AD741CN 概覽

Analog Devices AD741CN is a precision, general-purpose monolithic operational amplifier with internal compensation and full short-circuit protection. The device supports a minimum supply voltage of 10 V, has an open-loop gain of at least 25,000 V/V under the stated 1 kΩ load condition, and is offered in an 8-pin PDIP package. The AD741 family provides the precision input characteristics expected from a low-cost, high-accuracy operational amplifier.

An operational amplifier is a high-gain differential amplifier used to amplify the difference between two input voltages. Its category hierarchy extends from operational amplifier to analog amplifier, signal-conditioning IC, and semiconductor. The AD741C grade combines internally compensated operation with short-circuit protection, making it suitable for conventional precision analog signal chains where a stable closed-loop function is required.

The AD741 family specification highlights include low input offset voltage, low input bias current, low input offset current, and high common-mode rejection ratio. For the specially selected AD741L grade, the published maximum input offset voltage is 0.5 mV, maximum offset drift is 5 µV/°C, maximum input bias current is 50 nA, and maximum input offset current is 5 nA. The AD741K and AD741L grades provide a minimum common-mode rejection ratio of 90 dB. These characteristics distinguish the family from general-purpose amplifiers where offset and drift directly affect measurement accuracy.

The AD741C is internally compensated, reducing the external compensation components normally associated with operational-amplifier design. Internal compensation supports straightforward implementation of inverting, non-inverting, summing, comparator-style, and feedback-controlled circuits when the required bandwidth and stability conditions are met. Full short-circuit protection improves resilience when an output drives a load beyond its normal operating range, although sustained short-circuit conditions still require attention to device dissipation and junction temperature.

Typical uses include low-level sensor signal conditioning, instrumentation amplifiers, active filters, analog control loops, transducers, and precision reference-buffer stages. The 8-pin PDIP package is appropriate for conventional through-hole prototype boards, educational platforms, legacy control systems, and maintenance designs where a socketed or leaded package simplifies inspection and replacement.

Designers should preserve adequate supply headroom, verify input common-mode and output-swing limits against their operating voltage, and place input and feedback components close to the device to reduce parasitic sensitivity. Because the AD741C is a leaded legacy-style package, confirm mechanical dimensions, hole spacing, and pin orientation directly against the Analog Devices datasheet before committing a new printed circuit board.

This page combines the Analog Devices AD741 family specifications with package details, drop-in replacement analysis, application guidance, and practical circuit considerations. It helps engineers identify when the AD741CN is appropriate, compare it with related 8-pin operational amplifiers, and plan a replacement without overlooking electrical or mechanical compatibility.

直接替換替代品,適用於 AD741CN — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: AD741CN (相同外形與佔位) — 差異在於 Amplifier Type, Gain-Bandwidth Product, Package.

Analog Devices
Amplifier Type: General-purpose operational amplifier
Gain-Bandwidth Product: 1 MHz
比較對象 AD741CN →
STMicroelectronics
Amplifier Type: Single bipolar operational amplifier
Gain-Bandwidth Product: 2.1 MHz
Package: DIP-8
比較對象 AD741CN →

AD741AN

✅ 直接替換 ⚠️ 規格未經驗證
📦 8-pin PDIP
Same AD741 family architecture and 8-pin PDIP footprint; grade and exact suffix limits differ by up to 20% in key offset or noise specifications.

📋 參考替代品(不在目錄中)

AD741JN

✅ 直接替換 ⚠️ 規格未經驗證
Analog Devices
📦 8-pin PDIP
General-purpose operational amplifier · 1 circuit · 1 MHz · 5,000 uV · Internal · Full · Monolithic · 8-pin PDIP

聯絡詢價

查看資料表 →

AD741JH

✅ 直接替換 ⚠️ 規格未經驗證
📦 8-pin PDIP
Same AD741 family and 8-pin PDIP package; selected J-grade testing changes offset limits by approximately 20% relative to standard AD741C limits.

📋 參考替代品(不在目錄中)

LM741CN

✅ 直接替換
📦 8-pin PDIP
Conventional 8-pin 741-compatible pinout, but input offset and drift limits differ from the AD741 family; key accuracy parameters can vary by about 20%.

📋 參考替代品(不在目錄中)

TL081CN

✅ 直接替換
📦 8-pin PDIP
Pin-compatible 8-pin general-purpose JFET-input amplifier; bandwidth and offset characteristics differ by roughly 20% from AD741 family limits.

📋 參考替代品(不在目錄中)

MC33171N

✅ 直接替換
STMicroelectronics
📦 8-pin PDIP
Single bipolar operational amplifier · 1 channel · 2.1 MHz · 2 V/us · 200 uA · 4 V to 44 V · Extends to the lower supply rail · Bipolar

聯絡詢價

查看資料表 →

AD741CN 最大額定值與電氣特性

Product Type Single operational amplifier
Architecture Monolithic internally compensated operational amplifier
Number of Circuits 1 circuit
Minimum Total Supply Voltage 10 V
Open-Loop Gain AOL at 1 kΩ Load 25,000 V/V minimum
Input Offset Voltage, AD741L Grade 0.5 mV maximum
Input Offset Voltage Drift, AD741L Grade 5 µV/°C maximum
Input Bias Current, AD741L Grade 50 nA maximum
Input Offset Current, AD741L Grade 5 nA maximum
Common-Mode Rejection Ratio, AD741K and AD741L Grades 90 dB minimum
Compensation Internal
Short-Circuit Protection Full
封裝 8-pin PDIP
安裝類型 Through-hole

AD741CN 腳位配置

DIP-8 Package Pinout Diagram DIP-8 8-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 8 2 7 3 6 4 5 DIP-8
腳位 1 OFFSET NULL — Offset-voltage adjustment terminal
腳位 2 INVERTING INPUT — Inverting input terminal
腳位 3 NONINVERTING INPUT — Non-inverting input terminal
腳位 4 V- — Negative power-supply terminal
腳位 5 OFFSET NULL — Offset-voltage adjustment terminal
腳位 6 OUTPUT — Amplified output terminal
腳位 7 V+ — Positive power-supply terminal
腳位 8 NC — Not connected

典型應用

AD741CN 適用於 6 應用s: Precision Sensor Signal Conditioning, Active Audio Filtering, Instrumentation and Transducer Buffering, Analog Control Loop, Legacy Instrumentation Maintenance, Low-Level Summing and Mixing.

🏭

Precision Sensor Signal Conditioning

The AD741CN is appropriate for conditioning low-level sensor outputs when the source impedance and error budget are compatible with the operational amplifier's input characteristics. The AD741 family's precision grades reach 0.5 mV maximum input offset voltage, 5 µV/°C maximum offset drift, 50 nA maximum input bias current, and 5 nA maximum input offset current, although the designer must select the exact AD741 grade rather than apply the L-grade limits automatically to AD741CN. Configure the device in a non-inverting or differential stage, retain the specified feedback resistors, and check input common-mode range and output swing under the actual 10 V-minimum supply framework. A practical benefit is reduced offset contribution in bridge, temperature, pressure, and position sensing, while the trade-off is the relatively limited bandwidth and supply requirements of the established AD741 architecture.

🎧

Active Audio Filtering

AD741CN can implement first- and second-order active filter stages for audio and control-signal frequencies within its bandwidth. The internally compensated 741-family architecture simplifies closed-loop operation, while the AD741 family's precision input characteristics help reduce DC offset that could disturb filter symmetry. A practical implementation places the amplifier in the standard inverting or non-inverting topology and determines external R and C values from the required corner frequency and gain. Check the resulting noise gain against the device's stability behavior, verify output voltage swing at the selected supply, and keep the feedback network close to the pins. The tradeoff is that the AD741CN is not a rail-to-rail, low-noise, high-bandwidth audio device; it is better suited to conventional moderate-bandwidth active-filter functions where legacy supply voltages and DIP construction are acceptable.

📊

Instrumentation and Transducer Buffering

The AD741CN is useful as a buffered input stage for instrumentation and transducer circuits when its precision characteristics dominate the total error budget. The family specification emphasizes low input offset voltage, low offset drift, low bias current, and low offset current; selected grades reach 90 dB minimum CMRR. Use the amplifier to convert a bipolar or unipolar transducer signal into a single-ended voltage before a subsequent ADC or measurement stage. The design must account for the AD741CN input common-mode range, output swing, and minimum supply requirements, and it should avoid excessive source resistance that would turn input bias current into appreciable voltage error. The main benefit is a conventional, readily understood precision-amplifier interface, while the limitation is that modern low-power or rail-to-rail signal-chain ICs may offer better operating flexibility.

⚙️

Analog Control Loop

AD741CN can serve as the forward-path amplifier in a proportional, summing, or integral-control loop built with external resistors and capacitors. Its open-loop gain reaches at least 25,000 V/V under the stated 1 kΩ load condition, providing the amplification needed for conventional feedback control, while internal compensation reduces the external component burden. Select feedback and compensation values for the intended loop bandwidth, then verify that the target crossover region remains stable with the actual load and wiring. Pay attention to supply headroom, output slew requirements, and saturation recovery when the actuator or feedback node approaches a rail. This approach favors repairability, transparent tuning, and a DIP footprint; modern rail-to-rail devices may be preferable for battery-powered control systems that require lower voltage and quiescent current.

🔧

Legacy Instrumentation Maintenance

AD741CN is particularly relevant to maintenance and life-extension work involving older analog instruments, test equipment, educational platforms, and industrial controls built around 8-pin PDIP operational amplifiers. The through-hole package simplifies socket replacement, inspection, and prototype rework, while internal compensation and full short-circuit protection preserve the familiar behavior of the AD741 family. Before installation, verify the eight functional pins against the schematic, confirm positive and negative supply polarity, and check whether the existing circuit requires a particular offset-null connection. The principal benefit is minimal mechanical disruption to an existing board. The limitation is that through-hole replacement availability and the device's 10 V minimum supply demand may make a modern surface-mount amplifier more attractive for a complete redesign.

📡

Low-Level Summing and Mixing

AD741CN can combine several analog signals through an inverting summing amplifier or implement a difference stage with matched feedback ratios. Its open-loop gain of at least 25,000 V/V under a 1 kΩ load supports conventional closed-loop gain configurations, and its precision-oriented input specifications help limit errors introduced by the amplifier itself. Select resistor values that keep total output within the available voltage range, account for source impedance when bias-current error matters, and verify that the summing-node capacitance does not create stability problems. The DIP package also makes the stage convenient to prototype on perforated boards or legacy control cards. The tradeoff is that this established architecture offers less supply-voltage flexibility and generally less bandwidth than contemporary precision amplifiers, so designs with very small signals or fast transitions require careful offset and stability analysis.

What are the key specifications of AD741CN that engineers should know?
The AD741CN is a single, internally compensated, monolithic operational amplifier in an 8-pin PDIP package with full short-circuit protection. According to the Analog Devices AD741 datasheet, the family operates from a minimum total supply voltage of 10 V and provides an open-loop gain of at least 25,000 V/V with a 1 kΩ load. The AD741L grade reaches 0.5 mV maximum input offset voltage, 5 µV/°C maximum drift, 50 nA maximum input bias current, and 5 nA maximum input offset current. Confirm grade-specific limits before using those values as AD741CN production limits.
Where can I download the AD741CN datasheet PDF?
The official Analog Devices AD741 family datasheet is available at https://www.analog.com/media/en/technical-documentation/data-sheets/AD741.pdf. It contains the electrical characteristics, performance curves, package drawings, and ordering information needed to assess the AD741CN. Use the pin-description table and mechanical drawing when assigning an 8-pin PDIP footprint. Because AD741C, AD741J, AD741K, AD741L, and AD741S have different test limits, select the grade that matches the required accuracy and temperature grade.
What is the AD741CN pinout?
The AD741CN uses the conventional 8-pin PDIP operational-amplifier pinout: pin 1 is offset null, pin 2 is inverting input, pin 3 is non-inverting input, pin 4 is negative supply, pin 5 is offset null, pin 6 is output, pin 7 is positive supply, and pin 8 is not connected. According to the Analog Devices AD741 datasheet, pins 1 and 5 are used for offset adjustment and should not be left as general-purpose signal terminals. Verify orientation against the package notch before soldering.
Where can I buy AD741CN online?
The AD741CN can be requested through the Request a Quote form on this page. Quote requests should include the required quantity, packaging preference, destination, and target date. The device is listed as an 8-pin PDIP operational amplifier from Analog Devices, and its manufacturer part number is AD741CN. This form is the appropriate channel for current commercial terms, stock confirmation, and delivery scheduling without relying on a potentially stale static price.
What is the price of AD741CN?
Use the Request a Quote form on this page for the current AD741CN quotation. Pricing can vary with order quantity, manufacturing traceback, package condition, shipment destination, and supply status. The AD741CN is an 8-pin PDIP precision operational amplifier, so its commercial value can also depend on availability of the original Analog Devices device versus mechanically similar replacement grades. Submit the required quantity and purchase schedule for an actionable quotation.
What is the lead time for AD741CN?
Request the current AD741CN lead time through the Request a Quote form on this page. The required lead time depends on current inventory, order volume, component traceability, and delivery destination. AD741CN is an Analog Devices monolithic operational amplifier supplied in an 8-pin PDIP package; production planning should also account for possible transitions between standard AD741C inventory and compatible industry-standard operational amplifiers.
Is AD741CN in stock?
The current AD741CN stock position should be confirmed through the Request a Quote form on this page. Stock status changes with incoming inventory and order allocation, so a general catalog listing does not establish a guaranteed quantity for an incoming order. Provide your required quantity, date code requirements, packaging needs, and shipment destination. The part identifier and package configuration can be entered as AD741CN in 8-pin PDIP form.
AD741CN vs LM741CN — which is better for a precision analog circuit?
The AD741CN and LM741CN share the conventional 8-pin operational-amplifier architecture, but their manufacturer-specific limits and quality grades must be compared before interchangeability is assumed. The Analog Devices AD741 family specifies precision-oriented input characteristics, internal compensation, and full short-circuit protection, while the Analog Devices AD741 family specification gives 90 dB minimum CMRR for the K and L grades. Use the exact manufacturer datasheet for the LM741CN grade placed on the BOM rather than assuming family-level limits apply.
AD741CN vs AD741AN — what is the difference?
AD741CN and AD741AN belong to the same Analog Devices AD741 family, but their suffix codes identify different package and/or qualification combinations. AD741CN is identified as an 8-pin PDIP part, while the package designation of AD741AN must be confirmed from the Analog Devices ordering table. Both use the same precision operational-amplifier family architecture, so selection depends primarily on exact package, temperature grade, electrical limits, and lifecycle requirements.
When should I choose AD741CN over a modern operational amplifier?
Choose AD741CN when an existing design requires the established AD741 family architecture, an 8-pin PDIP footprint, internal compensation, and full short-circuit protection. It is particularly useful for maintenance of legacy analog equipment and through-hole instrumentation where changing the package would require PCB modification. For new high-speed, low-noise, low-power, or rail-to-rail designs, compare the AD741CN limits against modern alternatives rather than selecting it solely because it is a standard precision op amp.
Is AD741CN suitable for sensor signal conditioning?
Yes, AD741CN can be suitable for sensor signal conditioning when its input offset, bias current, common-mode range, output swing, supply voltage, and bandwidth meet the sensor requirements. The AD741 family emphasizes precision input characteristics, and the L grade reaches 0.5 mV maximum input offset voltage and 50 nA maximum input bias current. These values indicate suitability for moderate-impedance sensing, but the application must also respect the AD741CN common-mode range, output swing, supply voltage, and stability limits.
What can replace AD741CN?
AD741CN can be replaced by an electrically suitable 8-pin PDIP operational amplifier after checking pin assignment, supply range, offset voltage, input bias current, common-mode range, output swing, bandwidth, slew rate, noise, and compensation. Industry-standard 741-family devices such as LM741CN and TL081CN are common candidates, but each requires datasheet verification. A replacement is only a true drop-in option after confirming the same pin functions and equivalent operating limits.
What is the best industry-standard equivalent for AD741CN?
The best industry-standard equivalent for AD741CN is the device that preserves its 8-pin PDIP footprint and satisfies the circuit's electrical limits, not merely the one with a similar description. Cross-reference literature identifies 741-compatible families such as LM741 and TL081, while the AD741 family itself offers closely related grades. Compare CMRR, offset drift, bias current, common-mode range, supply range, output swing, bandwidth, and slew rate for the exact replacement suffix before approving it.
Can TL081CN replace AD741CN without changing the PCB?
TL081CN can use the same 8-pin PDIP footprint, but PCB fit alone does not guarantee a functional drop-in replacement. According to the pin-compatible equivalent guidance for 741-family amplifiers, TL081 is a relevant candidate. The circuit designer must compare TL081CN's input offset, input bias current, common-mode range, output swing, gain-bandwidth product, slew rate, noise, supply range, and stability behavior with the AD741CN requirements. Verify polarity and supply-pin assignments on the actual replacement datasheet.
Does the AD741CN need external compensation components?
The AD741CN does not require external compensation in its normal internally compensated operating configuration. The Analog Devices AD741 datasheet identifies internal compensation as a defining family feature, which simplifies feedback-amplifier construction and reduces component count. Some applications may still need external passive networks for filtering, gain shaping, or output isolation, but those are circuit functions rather than required frequency-compensation components. Keep feedback paths short and verify stability across the intended noise gain and load range.

工程參考資料,適用於 AD741CN — 比較、設計指引及合規資訊。

選型指南

Choose AD741CN when maintaining or reproducing a through-hole precision analog circuit that calls for the Analog Devices AD741 family, an 8-pin PDIP footprint, internal compensation, and full short-circuit protection. Select AD741AN or AD741JN when their grade-specific limits and ordering details better match the required accuracy. Choose LM741CN for a conventional industry-standard 741 implementation after verifying offset, bias current, common-mode range, output swing, and supply limits. Consider TL081CN when its JFET input and bandwidth are beneficial and its input noise and bias characteristics meet the source requirements. MC33171N is another 741-compatible option, but its electrical limits must be checked against the AD741CN circuit. For new battery-powered or rail-to-rail designs, compare modern low-power amplifiers because the AD741 family requires a 10 V minimum total supply and does not provide rail-to-rail input or output operation.

與替代品比較

參數 本產品 AD741AN AD741JN LM741CN TL081CN MC33171N
Brand Analog Devices Analog Devices Analog Devices Texas Instruments Texas Instruments onsemi
Package 8-pin PDIP 8-pin PDIP 8-pin PDIP 8-pin PDIP 8-pin PDIP 8-pin PDIP

主要差異化特點

  • Maintains the established Analog Devices AD741 family architecture while using a serviceable 8-pin PDIP package (對比TL081CN)
  • Provides a published minimum open-loop gain of 25,000 V/V at a 1 kΩ load (對比MC33171N)
  • Offers selected family grades with tightly controlled offset and common-mode rejection performance (對比LM741CN)

設計說明

Confirm the positive and negative supply rails against the AD741 family operating requirements before connecting the circuit. The family specifies a minimum total supply voltage of 10 V, and the actual input common-mode range and output swing must also remain inside the usable region. Check both steady-state supply levels and transient excursions so the output does not saturate during startup or load changes.

Use the 8-pin PDIP footprint shown in the Analog Devices package drawing and confirm the notch orientation before insertion. Keep the feedback network and input components near pins 2, 3, and 6 to minimize parasitic capacitance and resistance. On legacy boards, inspect socket contacts and oxidation because poor socket connections can appear as offset, drift, oscillation, or intermittent noise problems unrelated to the semiconductor.

Do not treat grade-specific AD741 limits as automatic AD741CN limits. The family specification gives especially stringent values for selected J, K, and L grades, including 0.5 mV maximum offset, 5 µV/°C maximum drift, 50 nA maximum bias current, and 90 dB minimum CMRR for applicable grades. Review the ordering table and guaranteed-limit columns for the C-grade AD741CN before setting the system error budget.

Full short-circuit protection does not remove the need to control dissipated power. Verify maximum output current, load impedance, ambient temperature, and copper exposure for the intended board. If the output may remain shorted, recalculate junction temperature and decide whether current limiting, a series fuse, or a protection strategy is required before relying on the device's short-circuit rating.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The Analog Devices product and datasheet pages establish the AD741 family identity, but no explicit RoHS, REACH, lead-free, halogen-free, or conflict-minerals declarations are identified for AD741CN.

資料驗證日期: 2026-11-09 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

AD741CN datasheet AD741CN pinout AD741CN datasheet pdf AD741CN specifications AD741CN operational amplifier AD741CN PDIP pinout AD741CN application circuit AD741CN equivalent AD741CN replacement AD741CN vs LM741CN AD741CN price AD741CN stock Analog Devices AD741CN AD741CN precision amplifier AD741CN signal conditioning

相關元件與詞彙

Analog Devices AD741 AD741CN AD741AN AD741JN AD741JH LM741CN TL081CN MC33171N operational amplifier precision operational amplifier monolithic operational amplifier analog amplifier signal-conditioning IC semiconductor internal compensation short-circuit protection input offset voltage input bias current common-mode rejection ratio open-loop gain 8-pin PDIP DIP package through-hole package precision signal conditioning
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情