Analog Devices

AD743JR-16 - Ultra-Low-Noise J-FET Amplifier | Analog Devices

MPN: AD743JR-16 ✗ 停產
±18 V Vdss 16-pin SOIC, 3.9 mm wide body Package
MOQ: 1 |

AD743JR-16 概覽

Analog Devices AD743JR-16 is an ultra-low-noise, precision J-FET-input operational amplifier with one amplifier circuit, a 4.5 MHz gain-bandwidth product, and a 2.8 V/µs slew rate. The device is packaged in a 16-pin SOIC and operates from ±18 V according to the manufacturer product information. The AD743 family combines the low voltage noise associated with bipolar-input amplifiers with the low input current of a FET-input device.

A J-FET-input operational amplifier is an analog amplifier whose differential input stage uses junction field-effect transistors. In the signal-chain hierarchy, it belongs to the precision operational-amplifier category and ultimately to the broader class of analog and mixed-signal semiconductor ICs. Its primary advantage over a bipolar-input amplifier is very low input bias current, while its primary advantage over a CMOS-input amplifier is typically lower voltage noise. These characteristics suit precision measurement and signal-conditioning circuits in which source impedance, noise, and signal integrity determine measurement accuracy.

The AD743JR-16 is identified as a single J-FET amplifier in a 16-SOIC package. Its documented 4.5 MHz bandwidth supports closed-loop operation over a broad range of signal frequencies, while its 2.8 V/µs slew rate governs large-signal response. The manufacturer describes the AD743 family as ultralow-noise and precision. It also notes that the amplifier does not exhibit output phase reversal when the negative common-mode input is driven, a behavior relevant to instrumentation circuits that may encounter bipolar signal excursions.

The 16-pin SOIC construction provides a standard surface-mount footprint for precision analog designs. Its analog and power connections should be handled according to the manufacturer pin-description table and recommended decoupling arrangement. Because the verified product information does not enumerate every electrical limit or pin function, designers should use the complete Analog Devices datasheet for input-voltage, output-voltage, input-current, noise-density, offset-voltage, and common-mode-mode specifications before releasing a production design.

Typical applications include low-noise signal conditioning, precision instrumentation, bridge and transducer front ends, high-impedance sensor interfaces, and audio or measurement preamplifiers. The combination of J-FET input behavior, low voltage noise, and moderate bandwidth is particularly useful when a circuit must preserve low-level signals while rejecting the input bias current penalty associated with conventional bipolar input stages. The 4.5 MHz bandwidth also makes it suitable for general-purpose precision gain stages operating below the amplifier's dominant-pole limit.

A key design consideration is the balance between source impedance, noise, and stability. J-FET inputs provide very low bias current, but the feedback network, source impedance, and output loading still determine effective signal-to-noise ratio. Decouple the supply pins locally, keep sensitive input routing short, and verify common-mode and output swing against the signal range. Do not assume that every AD743 revision or temperature grade has identical limits; compare the exact ordering code and its associated datasheet.

This page combines the verified manufacturer and distributor information for AD743JR-16 with practical selection guidance, family alternatives, application fit, and a pin-compatible comparison focused on engineers maintaining legacy precision-amplifier designs.

直接替換替代品,適用於 AD743JR-16 — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

此系列的變體

與下列產品可直接替換的同系列型號: AD743JR-16 (相同外形與佔位) — 差異在於 Amplifier Type, Gain-Bandwidth Product, Package, Slew Rate, Supply Voltage Range.

Analog Devices
Amplifier Type: Dual precision BiFET operational amplifier
Gain-Bandwidth Product: 13 MHz
Package: 8-pin SOIC
比較對象 AD743JR-16 →

AD743AJR-16

✅ 直接替換
📦 16-pin SOIC
AD743A functional revision with the same 16-pin SOIC footprint and the same -40 °C to +85 °C industrial temperature class

📋 參考替代品(不在目錄中)

AD743BJR-16

✅ 直接替換
📦 16-pin SOIC
AD743B functional revision with the same 16-pin SOIC footprint and the same -40 °C to +85 °C industrial temperature class

📋 參考替代品(不在目錄中)

AD743SJR-16

✅ 直接替換
📦 16-pin SOIC
AD743S military-temperature option with the same 16-pin SOIC footprint, but -55 °C to +125 °C versus -40 °C to +85 °C

📋 參考替代品(不在目錄中)

AD743JR-16 最大額定值與電氣特性

Amplifier Type Single J-FET operational amplifier
Number of Circuits 1 circuit
Gain-Bandwidth Product 4.5 MHz
Slew Rate 2.8 V/µs
Supply Voltage Range ±18 V
工作溫度範圍 -40 °C to +85 °C
封裝 16-pin SOIC, 3.9 mm wide body
安裝類型 Surface mount
Delivery Form Tube
AEC-Q100 Qualification Not applicable

AD743JR-16 16-pin soic, 3.9 mm wide body 腳位配置指南

AD743JR-16(16-pin soic, 3.9 mm wide body 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

AD743JR-16 的 16-pin soic, 3.9 mm wide body 封裝腳位圖

無詳細腳位定義資料: AD743JR-16.

請參閱 資料表 以查看完整腳位配置。

典型應用

AD743JR-16 適用於 6 應用s: Precision Instrumentation Signal Conditioning, High-Impedance Sensor Front End, Low-Level Audio Preamp, Precision Bridge Amplifier, Test and Measurement Buffer, Legacy Measurement Equipment Repair.

🖥️

Precision Instrumentation Signal Conditioning

AD743JR-16 fits the first gain stage of a precision instrumentation front end because its J-FET input architecture provides very low input current while the family is specified for ultralow voltage noise. Its 4.5 MHz gain-bandwidth product is suitable for moderate-bandwidth measurement channels, and the 2.8 V/µs slew rate permits faithful reproduction of moderate-amplitude sensor waveforms. Use the amplifier with symmetrical feedback networks and confirm the exact offset, common-mode, and output-swing limits for the selected AD743 revision. Local supply decoupling and short input routing are especially important because legacy measurement boards often use long sensor leads that can introduce leakage, capacitance, and interference.

🧩

High-Impedance Sensor Front End

AD743JR-16 is appropriate when measuring sensors with high source impedance because its FET-input stage avoids the comparatively high bias current of a conventional bipolar operational amplifier. This reduces source-loading error and allows a sensor's full signal to reach the gain stage. The design must still account for input capacitance, thermal leakage, guard-ring techniques, and the amplifier's exact bias-current limit in the selected grade. The 4.5 MHz gain-bandwidth product provides more bandwidth than many slow sensor signals require, while the 2.8 V/µs slew rate helps maintain signal fidelity when the source contains transients.

🎧

Low-Level Audio Preamp

AD743JR-16 can serve as a low-level audio preamplifier when preserving small signals is more important than achieving high-bandwidth operation. The ultralow-noise characterization of the AD743 family and its J-FET input stage suit microphone, instrument, and magnetic-sensor interfaces, while the 2.8 V/µs slew rate limits large-signal distortion. At the system level, gain must be selected so that bandwidth and output swing remain adequate, and the input network should avoid excessive source capacitance. The 16-pin SOIC package permits compact implementation, although the thermal performance of the surrounding board must be checked when operating continuously near its supply limits.

🏭

Precision Bridge Amplifier

AD743JR-16 is suitable for bridge or differential sensor interfaces when low input current helps preserve measurement accuracy across high source impedances. Its single-amplifier configuration can provide gain around the bridge midpoint, while the 4.5 MHz gain-bandwidth product is ample for most resistive and piezoelectric sensor bandwidths. The critical design checks are input common-mode range, output swing, offset behavior, and stability with the sensor's output capacitance. Maintain closely matched feedback resistors and route both differential inputs symmetrically to minimize conversion of common-mode noise and imbalance into a differential error.

⚡

Test and Measurement Buffer

AD743JR-16 works as a low-noise buffer or gain stage in laboratory and industrial test equipment where the measured source may have a high output impedance. Its J-FET input minimizes current drawn from the source, and the 4.5 MHz gain-bandwidth product permits operation at frequencies commonly encountered in precision measurement systems. The 2.8 V/µs slew rate is adequate for moderate-amplitude signals but must be checked against fast edge requirements. Keep input capacitance low, use a stable feedback network, and verify that the test signal stays inside the exact common-mode and output-voltage limits of the ordered AD743 grade.

🔧

Legacy Measurement Equipment Repair

AD743JR-16 is particularly relevant to maintenance of legacy analytical, process-control, and laboratory instruments that were designed around the original AD743 family. The 16-pin SOIC package allows replacement on boards with a compatible footprint, and the 4.5 MHz bandwidth is normally more than adequate for slow analog measurement signals. Repair engineers should compare the exact revision, temperature grade, offset trim, pin use, and supply arrangement before substitution. For obsolete inventory, request exact traceability and package form through the quotation form, and perform temperature, offset, noise, and stability checks before returning the instrument to service.

推薦產品摘要

AD743AJR-16 Same-family AD743 functional revision in the 16-pin SOIC package 用於: Precision Instrumentation Signal Conditioning, High-Impedance Sensor Front End, Low-Level Audio Preamp, Precision Bridge Amplifier, Test and Measurement Buffer, Legacy Measurement Equipment Repair AD743BJR-16 Same-family AD743 functional revision in the 16-pin SOIC package 用於: Precision Instrumentation Signal Conditioning, High-Impedance Sensor Front End, Precision Bridge Amplifier, Legacy Measurement Equipment Repair AD743SJR-16 Same-family option for wider-temperature audio equipment 用於: Low-Level Audio Preamp, Test and Measurement Buffer, Legacy Measurement Equipment Repair
What is the AD743JR-16?
The AD743JR-16 is a single ultralow-noise J-FET-input operational amplifier from Analog Devices, supplied in a 16-pin SOIC. According to the Analog Devices product information, the AD743 family combines the low voltage noise normally associated with bipolar-input amplifiers with the very low input current of a FET-input device. Its documented 4.5 MHz gain-bandwidth product and 2.8 V/µs slew rate make it appropriate for precision low-level signal conditioning rather than high-speed waveform processing.
What are the key specifications of AD743JR-16 that engineers should know?
The AD743JR-16 is a single J-FET amplifier in a 16-pin SOIC with a 4.5 MHz gain-bandwidth product, 2.8 V/µs slew rate, and an operating range of ±18 V. The manufacturer identifies the AD743 as an ultralow-noise, precision amplifier. Current-noise density, offset voltage, bias current, common-mode range, and output-swing limits should be taken from the exact ordering-code datasheet, because those values are not stated on the verified product page.
Where can I download the AD743JR-16 datasheet PDF?
The official AD743 family documentation is available through the Analog Devices product page at https://www.analog.com/en/products/ad743.html. Select the datasheet link for the AD743 and confirm that the document includes the AD743JR-16 ordering option. A separate 12-page PDF mirror also appears in the verified results, but the manufacturer's controlled document should be preferred for design decisions, revision history, pin descriptions, test conditions, and electrical limits.
Where can I find the AD743JR-16 pinout?
The AD743JR-16 pin assignments are found in the pin-configuration section of the Analog Devices AD743 datasheet. The device uses a 16-pin SOIC, and the pin-1 orientation should be taken from the manufacturer drawing rather than inferred from the package outline alone. Use the complete pin-description table when assigning supply, offset-null, feedback, input, and output nets, particularly on legacy layouts that use optional trim or compensation connections.
Is AD743JR-16 suitable for high-impedance sensor measurements?
Yes, AD743JR-16 is well suited to high-impedance sensor front ends because its J-FET input stage provides very low input current. That property minimizes the loading error generated across a high source impedance. The useful trade-off is that the circuit must still be designed around the amplifier's exact input-bias-current limit, input capacitance, noise density, and common-mode range, all of which must be confirmed from the datasheet for the selected AD743 grade.
What can replace AD743JR-16 in an existing design?
AD743AJR-16 and AD743BJR-16 are the closest same-family options identified for a legacy AD743JR-16 design because they retain the 16-pin SOIC footprint and belong to the AD743 precision J-FET amplifier family. AD743SJR-16 is also a 16-pin SOIC family option for military-temperature requirements. Because functional revision and temperature-grade differences can affect limits, review the exact pin configuration and electrical tables before approving any substitution.
Is AD743JR-16 the same as AD743JRZ-16?
AD743JR-16 and AD743JRZ-16 are ordering and packaging variants of the same AD743 device family, not different amplifier architectures. Cross-reference information identifies their electrical performance as equivalent for design purposes. The suffix distinction affects ordering or reel/tube presentation, so engineers should verify the physical dimensions, temperature grade, packing suffix, and marking when substituting one orderable code for another.
AD743JR-16 vs AD743AJR-16: which is better for a precision amplifier?
Choose AD743JR-16 when an existing design specifically calls for the original AD743 ordering code and its documented limits; choose AD743AJR-16 when the A revision provides a suitable functional update in the same 16-pin SOIC family. The verified information confirms the common package and family role but does not expose a complete numeric comparison of offset, noise, or common-mode limits. A revision-for-revision decision therefore requires the manufacturer datasheets and the original schematic requirements.
When should I choose AD743JR-16 over AD743SJR-16?
Choose AD743JR-16 for industrial-temperature legacy designs that do not require the AD743S military-temperature grade. Analog Devices states that AD743A and AD743B are rated from -40 °C to +85 °C, while AD743S is rated from -55 °C to +125 °C and may be processed to MIL-STD-883B, Rev. C. AD743SJR-16 is therefore appropriate when the wider -55 °C to +125 °C operating range is necessary.
Where to buy AD743JR-16 online?
Use the Request a Quote form on this page to request AD743JR-16 availability, exact packaging, and current lead time from XAIPART. The part is an obsolete legacy device, so stock and delivery schedules can vary by reel, tube, or quantity. Provide the required package suffix and annual usage in the request so procurement can confirm an exact, traceable supply rather than a generic AD743 family orderable code.
What is the price of AD743JR-16?
The current commercial terms for AD743JR-16 are handled through the Request a Quote form on this page. Because this is an obsolete component, availability and order quantity can vary by package configuration and demand. Submit the exact AD743JR-16 ordering code, required delivery packaging, quantity, and target date to obtain a current quotation without relying on a stale historical catalog amount.
What is the lead time for AD743JR-16?
The current lead time for AD743JR-16 should be requested through the Request a Quote form on this page. The verified product information identifies the device as an obsolete legacy amplifier and does not state a fixed manufacturing or delivery interval. Include the required tube or reel configuration, order quantity, and date the material is needed so procurement can confirm the most realistic supply plan.
Is AD743JR-16 in stock?
Stock status for the exact AD743JR-16 ordering code must be confirmed through the Request a Quote form on this page. Because AD743 is a legacy family and the ordering suffix can distinguish physical packing or qualification variants, request stock specifically for AD743JR-16 rather than AD743 generally. The Request a Quote response should identify available quantity, condition, package form, and expected lead time.
What is the best Analog Devices equivalent for AD743JR-16?
The best same-manufacturer family choices are AD743AJR-16 and AD743BJR-16, both associated with the AD743 precision J-FET family and a 16-pin SOIC configuration. AD743SJR-16 is the relevant family option when the military-temperature range is required. The correct equivalent depends on the original revision, temperature grade, and exact pin usage; verify all three before treating any option as a production drop-in replacement.
How should AD743JR-16 be used in a low-noise instrumentation amplifier?
AD743JR-16 can form the first gain stage when the source has high impedance and requires low input current. Its 4.5 MHz gain-bandwidth product must support the intended closed-loop gain and signal bandwidth, while the 2.8 V/µs slew rate must satisfy the largest expected output excursion. Keep input traces short, maintain symmetrical feedback resistors, provide local supply decoupling, and confirm common-mode and output-swing limits against the instrumentation signal range.

工程參考資料,適用於 AD743JR-16 — 比較、設計指引及合規資訊。

選型指南

Choose AD743JR-16 when maintaining an original legacy schematic that specifies the AD743 ordering code and its associated electrical limits. It is appropriate for precision, high-impedance, and low-level instrumentation circuits where low input current and ultralow-noise characteristics are important, provided the signal bandwidth and output swing remain within the amplifier's limits. Select AD743AJR-16 or AD743BJR-16 when a functional AD743 revision is desired on the same 16-pin SOIC footprint; review the revision-specific offset, noise, bias-current, common-mode, and stability data before replacing an operating design. Select AD743SJR-16 when the system requires the -55 °C to +125 °C military-temperature range or documented MIL-STD-883B processing. Because AD743 is an obsolete family, procurement should request the exact ordering code and physical packing form, while engineering should preserve the original part wherever practical to minimize requalification risk.

與替代品比較

參數 本產品 AD743AJR-16 AD743BJR-16 AD743SJR-16
Package 16-pin SOIC 16-pin SOIC - same footprint 16-pin SOIC - same footprint 16-pin SOIC - same footprint
Brand Analog Devices Analog Devices Analog Devices Analog Devices
Amplifier Type Single J-FET operational amplifier AD743A precision J-FET operational amplifier AD743B precision J-FET operational amplifier AD743S precision J-FET operational amplifier
Number of Circuits 1 circuit 1 circuit 1 circuit 1 circuit
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C -40 °C to +85 °C -55 °C to +125 °C
Special Qualification No military processing stated Industrial temperature grade Industrial temperature grade Available processed to MIL-STD-883B, Rev. C

主要差異化特點

  • Original AD743 ordering code for legacy design continuity (對比AD743AJR-16)
  • Industrial-temperature coverage matches the AD743A and AD743B class (對比AD743AJR-16)
  • Lower cost family option for legacy instrumentation repair (對比AD743SJR-16)
  • Documented bandwidth and slew rate for moderate-speed precision signals (對比AD743BJR-16)

設計說明

Place supply-decoupling capacitors close to the amplifier's supply and ground pins, and keep the feedback loop compact. The 4.5 MHz gain-bandwidth product means that even modest extra capacitance around an input or output pin can alter stability or channel response. Route the differential input pair symmetrically, avoid long traces beneath noisy circuitry, and use a ground reference that follows the device pin-description table. For repair boards, inspect for contamination and damaged solder joints because these issues can mimic the offset or noise problems normally associated with an aging J-FET amplifier.

Validate both small-signal bandwidth and large-signal behavior with the intended closed-loop gain. The nominal 4.5 MHz gain-bandwidth product should be divided by the required noise gain to estimate the usable closed-loop bandwidth, while the 2.8 V/µs slew rate must be adequate for the fastest output transition. Check the output against its voltage limits and preserve the common-mode range required by the source. This is particularly important when replacing a legacy amplifier with the same package but a different family revision.

Do not select an alternative solely because it uses a 16-pin SOIC. Confirm the exact pin configuration, revision-level electrical limits, temperature grade, offset trim, and exposed functional options in the manufacturer documentation. AD743AJR-16 and AD743BJR-16 are industrial-temperature family revisions, whereas AD743SJR-16 extends operation to -55 °C to +125 °C and may be processed to MIL-STD-883B, Rev. C. For an obsolete production design, preserve the original part number wherever possible and validate any substitute for offset, noise, bias current, output swing, and stability.

Power dissipation and temperature rise depend on the actual supply voltage, output voltage, load current, package thermal resistance, and board copper. The verified information does not provide a complete power table for the exact ordering code, so obtain those limits from the manufacturer datasheet before operating continuously at the ±18 V supply condition. Use the same thermal data when comparing AD743JR-16 with an alternative because changes in input bias, output swing, or quiescent behavior may affect allowable dissipation.

合規資訊

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

The AD743S family option is available processed to MIL-STD-883B, Rev. C. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations are not stated in the manufacturer product information and therefore remain unknown.

資料驗證日期: 2026-11-18 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

AD743JR-16 datasheet AD743JR-16 specifications AD743JR-16 pinout AD743JR-16 datasheet pdf AD743JR-16 equivalent AD743JR-16 replacement AD743JR-16 cross reference AD743JR-16 price AD743JR-16 stock Analog Devices AD743JR-16 AD743JR-16 16-SOIC amplifier AD743JR-16 vs AD743AJR-16 AD743JR-16 high impedance amplifier AD743JR-16 instrumentation amplifier AD743JR-16 low noise preamp

相關元件與詞彙

Analog Devices AD743 AD743JR-16 AD743AJR-16 AD743BJR-16 AD743SJR-16 AD743JRZ-16 J-FET operational amplifier precision operational amplifier analog amplifier IC low-dropout regulator field-effect transistor input bipolar-input operational amplifier gain-bandwidth product slew rate voltage noise input bias current common-mode voltage 16-pin SOIC SOIC family surface-mount package instrumentation amplifier high-impedance sensor bridge amplifier MIL-STD-883B
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情