AD746SQ - Dual 13MHz BiFET Op Amp | Analog Devices
MPN: AD746SQ ✓ 啟用中AD746SQ 概覽
A BiFET operational amplifier is a voltage-feedback amplifier whose input stage uses junction field-effect transistors. This amplifier family belongs to the operational-amplifier hierarchy, which includes instrumentation amplifiers, rail-to-rail amplifiers, transimpedance amplifiers, and general-purpose voltage amplifiers. The AD746 combines low input bias current characteristics with the bandwidth and slew performance needed for active filters, sample-and-hold circuitry, instrumentation, and signal-conditioning systems.
The principal features include dual-amplifier integration in one package, a 13 MHz gain-bandwidth product, and 500 ns settling performance. Monolithic construction helps maintain matching between amplifier channels, which is valuable in differential signal chains and precision filter designs. Each channel includes the conventional inputs, output, and power connections required to configure non-inverting, inverting, summing, or active-filter amplifier circuits.
The AD746SQ uses the AD746 family architecture, where two AD744 BiFET operational amplifiers share one die. This construction supports consistent channel behavior and makes the device suitable where matched dynamic performance is more useful than the absolute current capability of a high-power amplifier. Its bandwidth makes it appropriate for signal paths extending beyond audio-band precision-only applications, while its BiFET input stage supports high-impedance source interfaces when source impedance and bias-current error are properly considered.
Typical uses include active low-pass and band-pass filters, instrumentation preamplifiers, audio and communication-signal conditioning, analog-to-digital converter input drivers, and precision sample-and-hold systems. The dual configuration can implement two closely related channels on one board, reducing component count and helping preserve consistency between complementary or differential functions.
Designers should follow the manufacturer datasheet for the exact DC supply limits, input common-mode range, output swing, offset voltage, bias current, slew rate, noise, and pin configuration. Ceramic DIP construction should also be evaluated against environmental sealing, thermal cycling, vibration, and soldering-process requirements rather than assuming that a hermetic package is interchangeable with a plastic DIP.
This page combines the AD746 family architecture and package information with application guidance, verified source links, comparison parameters, and design checks for engineers evaluating the AD746SQ in precision analog signal chains.
直接替換替代品,適用於 AD746SQ — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
AD746AQ
✅ 直接替換 ⚠️ 規格未經驗證聯絡詢價
查看資料表 →AD746SQ/883B
✅ 直接替換📋 參考替代品(不在目錄中)
AD746SQ 最大額定值與電氣特性
| Amplifier Type | Dual precision operational amplifier |
| Input Transistor | BiFET |
| Number of Amplifiers | 2 channels |
| Monolithic Circuit Composition | Two AD744 amplifiers on one die |
| Gain-Bandwidth Product | 13 MHz |
| Settling Time | 500 ns |
| Package Type | 8-pin CERDIP |
| 腳位數 | 8 pins |
| 安裝類型 | Through-hole |
| Channel Matching | Close AC and DC matching |
AD746SQ 腳位配置
| 腳位 1 | OUT A — Amplifier A output |
| 腳位 2 | -IN A — Amplifier A inverting input |
| 腳位 3 | +IN A — Amplifier A non-inverting input |
| 腳位 4 | V- — Negative power supply |
| 腳位 5 | +IN B — Amplifier B non-inverting input |
| 腳位 6 | -IN B — Amplifier B inverting input |
| 腳位 7 | OUT B — Amplifier B output |
| 腳位 8 | V+ — Positive power supply |
典型應用
AD746SQ 適用於 6 應用s: Precision Active Filters, Instrumentation Signal Conditioning, Sample-and-Hold Systems, Data Converter Input Conditioning, Audio and Communication Signal Paths, Legacy Test and Measurement Equipment.
Precision Active Filters
The AD746SQ fits active low-pass, band-pass, and notch-filter stages because each channel provides a 13 MHz gain-bandwidth product and 500 ns settling capability. Its two AD744 amplifiers share one monolithic die, helping preserve close AC and DC matching when a design uses both channels for related signal paths. Place the feedback network close to the inverting input, maintain symmetrical routing where channel matching matters, and use the manufacturer electrical tables to establish usable gain and bandwidth. The principal engineering benefit is adequate speed for precision filtering without requiring a separate amplifier for each channel.
推薦
Instrumentation Signal Conditioning
The AD746SQ can condition high-impedance sensor signals in instrumentation systems where amplifier input bias and offset errors affect measurement accuracy. Its BiFET input stage, 13 MHz bandwidth, and 500 ns settling behavior support low-frequency precision channels as well as moderate-bandwidth acquisition paths. The two monolithic channels can process related sensor or reference signals on one board. Engineers should calculate the bias-current error from the source resistance, check common-mode and output-swing limits in the manufacturer datasheet, and place input protection away from sensitive amplifier nodes.
推薦
Sample-and-Hold Systems
The AD746SQ is appropriate for sample-and-hold signal paths that require a 500 ns settling-time capability and a 13 MHz gain-bandwidth product. Each amplifier can buffer the hold capacitor or provide gain around an external sampling switch, while the dual layout supports two related channels. The ceramic DIP construction is relevant for legacy laboratory and test equipment. Layout must keep the hold capacitor, switch, and amplifier output connections short, and the design must verify acquisition time, output swing, and switch-induced charge injection against the measured settling requirement.
推薦
Data Converter Input Conditioning
The AD746SQ can drive or condition analog inputs for data-conversion systems when the required bandwidth and settling behavior fit its 13 MHz gain-bandwidth product and 500 ns settling specification. Two channels on one monolithic die can simplify differential drive, reference buffering, or independent signal conditioning. The amplifier's BiFET characteristics are useful with high-impedance sources, but the complete input network must remain within the common-mode range and preserve output headroom. Use short, guarded routing and decouple the supply pins close to the device for repeatable acquisition behavior.
推薦
Audio and Communication Signal Paths
The AD746SQ is useful in audio and communication equipment where a precision BiFET amplifier with substantially more bandwidth than a basic audio op amp is required. Its 13 MHz gain-bandwidth product supports wider-band signal conditioning, while the 500 ns settling specification helps control transient recovery. The dual configuration can handle one transmit or receive channel and one auxiliary signal path. Designers should still verify noise density, slew rate, output swing, and load capability in the manufacturer datasheet, then keep input and feedback traces short to avoid adding unintended gain or instability.
推薦
Legacy Test and Measurement Equipment
The 8-pin CERDIP AD746SQ is suited to repair and extension of legacy test and measurement equipment designed around the AD746 family. Two precision BiFET amplifiers, 13 MHz bandwidth, and 500 ns settling behavior provide useful performance for analog source drivers, filter stages, and acquisition circuits. Ceramic DIP construction may also fit equipment requiring a sealed, through-hole package. Before substitution, verify pin orientation, ceramic-package dimensions, temperature range, screening class, and the exact electrical limits from the manufacturer documentation.
推薦
推薦產品摘要
工程參考資料,適用於 AD746SQ — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | AD746AQ | AD746SQ/883B |
|---|---|---|---|
| Package | 8-pin CERDIP | 8-pin CERDIP | 8-pin CERDIP |
| Brand | Analog Devices | Analog Devices | Analog Devices |
| Amplifier Configuration | Dual | Dual | Dual |
| Input Stage | BiFET | BiFET | BiFET |
| Gain-Bandwidth Product | 13 MHz | 13 MHz | 13 MHz |
| Settling Time | 500 ns | 500 ns | 500 ns |
| Channel Matching | Close AC and DC matching | Close AC and DC matching | Close AC and DC matching |
| Mounting Type | Through-hole | Through-hole | Through-hole |
主要差異化特點
- Matched dual BiFET channels on one monolithic die (對比AD746AQ)
- Same ceramic-DIP mechanical platform (對比AD746SQ/883B)
- Fast transient performance for precision analog stages (對比AD746AQ)
設計說明
Follow the manufacturer pin diagram and keep the two amplifier channels physically separated when matching is important. Route feedback components directly between the output and inverting-input pins, avoid stubs on high-impedance inputs, and place supply bypass capacitors close to pins 4 and 8. Because the AD746SQ is a through-hole ceramic DIP, prioritize mechanical spacing, socket alignment, and unobstructed rework access during board layout.
Use short feedback paths and assess the feedback-network capacitance before selecting high closed-loop gains. The 13 MHz gain-bandwidth product and 500 ns settling characteristic provide substantial operating margin, but parasitic capacitance in a ceramic-DIP socket and PCB can alter high-frequency stability. Prototype the completed layout, probe the inverting-input node, and verify ringing and settling with the intended load and supply conditions.
Do not substitute a generic dual operational amplifier solely because the pin count matches. Confirm the CERDIP outline, power-pin positions, input-stage behavior, common-mode range, output swing, slew rate, offset, noise, temperature range, and screening status. For legacy equipment, also inspect whether either channel is intentionally unbalanced or configured for an unusual bias arrangement before changing the device.
合規資訊
The available family documentation does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals status for the AD746SQ. AEC-Q100 is not applicable to this analog operational amplifier.